Publikácie 2009


CAGÁŇOVÁ, Dagmar - GEBURA, Marek - OSLANEC, Peter - GRGAČ, Peter. Introduction to Materials Science = Úvod do materiálového inžinierstva. Editor Jozef Janovec, Petra Uličná. Trnava : AlumniPress, 2009. 82 s. ISBN 978-80-8096-104-6.

KROPÁČ, Oldřich - MÚČKA, Peter. Estimation of Waviness of the Longitudinal Road Profile from Straightedge Measurement. In Journal of Transportation Engineering ASCE, 2009, vol.135, no.11, p.801-812. (0.665 - IF2008). ISSN 0733-947X.

KROPÁČ, Oldřich - MÚČKA, Peter. Effects of longitudinal road waviness on vehicle vibration response. In Vehicle System Dynamics, 2009, vol. 47, no.2, p.135-153. (0.724 - IF2008). (2009 - Current Contents). ISSN 0042-3114.

KROPÁČ, Oldřich - MÚČKA, Peter. Alternative single-number indicator of longitudinal road unevenness. In Canadian Journal of Civil Engineering, 2009, vol. 36, no.3, pp.389-401. (0.291 - IF2008). ISSN 1208-6029.

MÚČKA, Peter - KROPÁČ, Oldřich. Sensitivity of road unevenness indicators to road waviness. In Journal of Testing and Evaluation, 2009, vol.37, no.2, p.139-149. (0.324 - IF2008). ISSN 0090-3973.

KROPÁČ, Oldřich - MÚČKA, Peter. Classification scheme for random longitudinal road unevenness considering road waviness and vehicle response. In Shock and Vibration, 2009, vol.16, p.273-289. (0.465 - IF2008). (2009 - Current Contents). ISSN 1070-9622.

RANACHOWSKI, P. - REJMUND, F. - RANACHOWSKI, Z. - PAWELEK, A. - PIATKOWSKI, A. - KÚDELA, Stanislav, Jr.. Materials degradation research on the basis of mechanoacoustic and microscopic methods = Mechanoakustyczna i mikroskopowa metoda badania degradacji materialów. In Archives of Metallurgy and Materials, 2009, vol. 54, no.4, p.718-725. (0.230 - IF2008). (2009 - Current Contents). ISSN 1733-3490.

BALOG, Martin - SIMANČÍK, František - BAJANA, Otto - GUILLERMO, Requena. ECAP vs.direct extrusion - Techniques for consolidation of ultra-fine Al particles. In Materials Science and Engineering A : structural materials, 2009, vol. 504, no.1-2, p.1-7. (1.806 - IF2008). (2009 - SCOPUS). ISSN 0921-5093.

DANNINGER, Herbert - HAROLD, Christian - ROUZBAHANI, Fardin - PONEMAYR, Helmut - DAXELMÜLLER, Manfred - SIMANČÍK, František - IŽDINSKÝ, Karol. Particle-Reinforced Carbon-Free Precipitation-Hardening High-Speed Steels. In International Journal of Powder Metallurgy, 2009, vol. 45, no. 6. (0.327 - IF2008). (2009 - Current Contents). ISSN 0888-7462.

STEIN, George Juraj - MÚČKA, Peter - GUNSTON, T.P. A study of locomotive driver´s seat vertical suspension system with adjustable damper. In Vehicle System Dynamics, 2009, vol. 47, no.3, p.363-386. (0.724 - IF2008). (2009 - Current Contents). ISSN 0042-3114.

STEIN, George Juraj - MÚČKA, Peter - HINZ, Barbara - BLÜTHNER, Ralph. Measurement and modelling of the y-direction apparent mass of sitting human body-cushioned seat system. In Journal of Sound and Vibration, 2009, vol. 322, nos.1-2, p. 454-474. (1.364 - IF2008). ISSN 0022-460 X.

MOSER, Zbigniew - ŠEBO, Pavol - GĄSIOR, Władisłw - ŠVEC, Peter - PSTRUŚ, Janusz. Effect of indium on wettability of Sn-Ag-Cu solders. Experiment vs. modeling. In CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 2009, vol.33, no.1, pp.63-68. (1.530 - IF2008). ISSN 0364-5916.

ŠEBO, Pavol - MOSER, Zbigniew - ŠVEC, Peter - JANIČKOVIČ, Dušan - DOBROČKA, Edmund - GASIOR, Wladyslaw - PSTRUŚ, Janus. Effect of indium on the microstructure of the interface between Sn3.13Ag0.74Culn solder and Cu substrate. In Journal of Alloys and Compounds, 2009, vol. 480, no. 2, p. 409-415. (1.510 - IF2008). (2009 - Current Contents, WOS, SCOPUS). ISSN 0925-8388.

KÚDELA, Stanislav, Jr. - WENDROCK, Horst - KÚDELA, Stanislav - PAWELEK, Andrzej - PIATKOWSKI, Andrzej - WETZIG, Klaus. Fracture behavior of Mg-Li matrix composites. In International Journal of Materials Research, 2009, vol. 100, no. 6, p. 910-914. (0.819 - IF2008). (2009 - Current Contents). ISSN 1862-5282.

BALOG, Miroslav - VRETENÁR, Viliam - VÁVRA, Ivo - ZHANG, J. - CRIMP, M.A. - KUBIČÁR, Ľudovít - LENČÉŠ, Zoltán. Thermophysical properties of electrically conductive SiC-(Nb,Ti-C)ss-based cermets. In International Journal of Thermophysics, 2009, vol. 30, no. 6, p. 1918-1930. (0.889 - IF2008). ISSN 0195-928X.

LAPIN, Juraj - GABALCOVÁ, Zuzana - BAJANA, Otto. The effect of microstructure on mechanical properties of directionally solidified intermetallic Ti-46Al-8Nb alloy. In Kovové materiály, 2009, roč. 47, s.159-167. (2009 - Current Contents, WOS, SCOPUS). ISSN 0023-432X.

LAPIN, Juraj - GEBURA, Marek - BAJANA, Otto - PELACHOVÁ, Tatiana - NAZMY, M. Effect of size and volume fraction of cuboidal γ´ precipitates on mechanical properties of single crystal nickel-based superalloy CMSX-4. In Kovové materiály, 2009, roč. 47, s.129 -138. (2009 - Current Contents, WOS, SCOPUS). ISSN 0023-432X.

ŠTEFÁNIK, Pavol - BERONSKÁ, Naďa - ŠEBO, Pavol. Influence of chromium in copper alloys on wetting of some refractory metals. In Kovové materiály, 2009, roč. 47, č.5, s.349-352. (2009 - Current Contents, WOS, SCOPUS). ISSN 0023-432X.

ŠEBO, Pavol - ŠVEC, Peter - JANIČKOVIČ, Dušan - ILLEKOVÁ, Emília. Influence of indium and copper in Sn3.5Ag0.4CuIn solder on its interaction with copper. In Kovové materiály, 2009, roč. 47, s.275-282. (2009 - Current Contents, WOS, SCOPUS). ISSN 0023-432X.

BESTERCI, Michal - VELGOSOVÁ, Oksana - IVAN, Jozef - HVIZDOŠ, Pavol - KVAČKAJ, Tibor - KULU, Priit. Fracture mechanism of Al-Al4C3 nanomaterials studied by "in-situ tensile test in SEM". In Kovové materiály, 2009, roč. 47, č. 4, s. 221-225. (2009 - Current Contents, WOS, SCOPUS). ISSN 0023-432X.

IŽDINSKÁ, Zita - GÁBRIŠOVÁ, Z. - GONDÁR, Ernest - ZEMÁNKOVÁ, Milina. The effect of localized deformation on the identation crack growth in Si3N4. In Kovové materiály, 2009, roč. 47, s.239-245. (2009 - Current Contents, WOS, SCOPUS). ISSN 0023-432X.

BERONSKÁ, Naďa - IŽDINSKÝ, Karol - ŠTEFÁNIK, Pavol - SIMANČÍK, František - ZEMÁNKOVÁ, Milina - DVORÁK, Tomáš. The influence of Cr on structure and thermal expansion of copper matrix composites reinforced with unidirectionally aligned continuous high modulus C fibres. In Kovové materiály, 2009, roč. 47, s.175 -184. (2009 - Current Contents, WOS, SCOPUS). ISSN 0023-432X.

BESTERCI, Michal - VELGOSOVÁ, Oksana - IVAN, Jozef - HVIZDOŠ, Pavol - KVAČKAJ, Tibor - KULU, Priit. In situ tensile testing in SEM of Al-Al4C3 nanomaterials. In Estonian Journal of Engineering, 2009, vol. 15, no. 4, p. 247-254. ISSN 1736-6038.

NOSKO, Martin - SIMANČÍK, František - FLOREK, Roman - BALOG, Martin. Mechanical properties of aulight aluminium foam affected by foaming parameters. In Powder Metallurgy Progress, 2008, vol. 8, no. 3, p. 264-269. ISSN 1335-8978.

KOLENIČ, František - BLAŽÍČEK, Peter - RUŽA, Viliam - IŽDINSKÝ, Karol - ŠEBO, Pavol. Spájkovateľnosť kombinácie materiálov γTiAl - nízkolegovaná oceľ a γTiAl- niklová zliatina. In Zvárač : Aktuality zo sveta zvárania, spájkovania a deliacich technológií., 2009, roč. VII, č.3, s.7-12. ISSN 1336-5045.

ŠTEFÁNIK, Pavol - BERONSKÁ, Naďa - IŽDINSKÝ, Karol. Influence of thermal cycling on microstructure and thermal expansion of carbon fibres/copper composites. In Materials Engineering, 2009, vol. 16, no.3, p.1-6. ISSN 1335-0803.

JURČI, P. - DOMÁNKOVÁ, Mária - ŠUŠTARŠIČ, B. - BALOG, Martin. Structure and properties of PM Al-7Cr alloy prepared by rapid solidification. In Powder Metallurgy Progress : Journal of Science and Technology of Particle Materials, 2008, vol.8, no.3, p.217-229. ISSN 1335-8978.

HRNČIAR, Viliam - LAPIN, Juraj - DEMIAN, Svetozár - ŠVEC, Pavol. On development of optimal metallurgical process for preparation of a new generation of intermetallic alloys. In Materials Engineering, 2009, vol. 16, no.2, p.5-10. ISSN 1335-0803.

ŠEBO, Pavol - ŠVEC, Peter - JANIČKOVIČ, Dušan. Spájkovanie bez olova. In Zváranie : odborný časopis so zameraním na zváranie a príbuzné technológie, 2009, roč. 58, č.5-6, s.145-146. ISSN 0044-5525.

ŠEBO, Pavol - ŠVEC, Peter - JANIČKOVIČ, Dušan - ŠTEFÁNIK, Pavol. Wetting of copper by lead-free Sn-Cu solders and shear strength of Cu - Cu joints. In Materials Engineering, 2009, vol. 16, no.2, p.18-21. ISSN 1335-0803.

BESTERCI, Michal - VELGOSOVÁ, Oksana - IVAN, Jozef - HVIZDOŠ, Pavol - KVAČKAJ, Tibor - SÜLLEIOVÁ, Katarína - VARCHOLA, Marián. The fracture mechanism of "in situ" Al-Al4C3 nanomaterials. In Powder Metallurgy Progress : Journal of Science and Technology of Particle Materials, 2009, vol. 9, no. 4, p. 219-223. ISSN 1335-8978.

ČAČKO, Jozef. Performance-limited material design of dynamically loaded components. In Material and Component Performance under Variable Amplitude Loading. Vol. II. Editor C.M. Sonsino, P.C. McKeighan. - Berlin : DVM, 2009, s.743-752. ISBN 978-3-00-027049-9.

KOVÁČIK, Jaroslav - BIELEK, J. - EMMER, Štefan. Cu-graphite composites: Composition dependence of friction coefficient. In Friction, Wear and Wear Protection : international symposium on friction, wear and wear protection 2008. Editor Alfons Fischer, Kirsten Bobzin. - Weinheim : Wiley-VCH Verlag, 2009, s.67-73. ISBN 978-3-527-32366-1.

GEBURA, Marek - LAPIN, Juraj. Effect of multiaxial stress conditions on microstructure degradation of nickel base single crystal superalloy CMSX-4 during creep. In METAL 2009 : 18.mezinárodní konference metalurgie a materiálů. Editor Jiří KLÍBER, Miroslav KURSA. - Ostrava : TANGER, 2009. ISBN 978-80-87294-03-1.

GABALCOVÁ, Zuzana - LAPIN, Juraj. Experimental study of columnar to equiaxed transition during directional solidification of intermetallic Ti-46Al-8Nb alloy. In METAL 2009 : 18.mezinárodní konference metalurgie a materiálů. Editor Jiří KLÍBER, Miroslav KURSA. - Ostrava : TANGER, 2009. ISBN 978-80-87294-03-1.

LAPIN, Juraj. TiAl-based alloys: present status and future perspectives. In METAL 2009 : 18.mezinárodní konference metalurgie a materiálů. Editor Jiří KLÍBER, Miroslav KURSA. - Ostrava : TANGER, 2009. ISBN 978-80-87294-03-1.

LAPIN, Juraj - GEBURA, Marek - PELACHOVÁ, Tatiana - BAJANA, Otto. Microstructure degradation of nickel base single crystal superalloy CMSX-4. In METAL 2009 : 18.mezinárodní konference metalurgie a materiálů. Editor Jiří KLÍBER, Miroslav KURSA. - Ostrava : TANGER, 2009. ISBN 978-80-87294-03-1.

NOSKO, Martin - SIMANČÍK, František - FLOREK, Roman. Assesment of the Structure Uniformity within Standard Block of Aluminium Foam - Alporas. In Cellular Metals for Structural and Functional Applications : proceedings of the international symposium on cellular metals for structural and functional applications. Editor Günter Stephani, Bernd Kieback. - Dresden : Fraunhofer IFAM, 2009, s.246-251.

GUALCO, C. - GRATTAROLA, M. - FEDERICI, A. - MATALONI, F. - IŽDINSKÝ, Karol - SIMANČÍK, František - SCHWARZ, B. - GARCIA-ROSALES, C. - LÓPEZ-GALILEA, I. Brazing Technology for Plasma Facing Components in Nuclear Fusion Applications Using Low and Graded CTE Interlayers. In New Materials for Extreme Environments : 1st international conference. Editor Ch. Linsmeier and M. Reinelt. - Stafa-Zurich : Trans.Tech.Publications Ltd, 2009, pp. 192-197. ISBN 0-87849-344-1.

STEIN, George Juraj - MÚČKA, Peter. Simulation Study of Simultaneous Shock and Vibration Control by a Fore-and-Aft Suspension System of a Driver´s Seat. In 4th International Conference on Whole Body Vibration Injuries. Editor Subhash Rakheja, Paul-Émile Boileau. - Montréal : Concordia University, 2009, p. 95-96.

KORÁB, Juraj - DVORÁK, Tomáš - ŠTEFÁNIK, Pavol - KAVECKÝ, Štefan. Design of small divertor segments for fusion reactor applications. In MATRIB 2009 : international conference. Editor Krešimir Grilec, Gojko Marić. - Zagreb : Hrvatsko društvo za materijale a tribologiju, 2009, s.363-367. ISBN 978-953-7040-15-4.

HRNČIAR, Viliam - LAPIN, Juraj - DEMIAN, Svetozár - ŠVEC, Pavol. Plasma Metallurgy Parameters Influence on Homogenity of Intermetallic Alloys Ti-Al-X. In Progressive Technologies and Materials. 3-A Technologies. Progressive Technologies and Materials. 3-A.Technologies. Editor Stanislaw Kut ; jacek Mucha. - Rzeszów : Oficyna Wydawnicza Politechniki Rzeszowskiej, 2009, s.83-91. ISBN 978-83-7199-550-7.

MATĚJÍČEK, Jiří - IŽDINSKÝ, Karol - VONDROUŠ, Petr. Methods of Increasing Thermal Conductivity of Plasma Sprayed Tungsten-Based Coatings. In New Materials for Extreme Environments : 1st international conference. Editor Ch. Linsmeier and M. Reinelt. - Stafa-Zurich : Trans.Tech.Publications Ltd, 2009, pp.82-86. ISBN 0-87849-344-1.

WISZT, Erich - WISZTOVÁ, Elena. Power flow in Road Vehicle Suspension Models with Active Damping. In Interaction and Feedbacks 2009 : proceedings. Editor I. Zolotarev. - Prague : Institute of Thermomechanics AS CR, 2009, s.85-92. ISBN 978-80-87012-23-9.

HECHT, U. - DALOZ, D. - LAPIN, Juraj - DREVERMANN, A. - WITUSIEWICZ, V.T. - ZOLLINGER, J. Solidification of TiAl-based alloys. In Materials Research Society Symposium : proceedings. Editor M. Palm, B.P. Bewlay, M. Takeyama, J.M.K. Wiezorek, Y-H. He. - Warrendale : MRS, 2009, s.79-90. ISBN 978-1-60511-100-1.

KOVÁČIK, Jaroslav - EMMER, Štefan. Vplyv zloženia na koeficient trenia v kompozitnom systéme Cu-grafit = Effect of composition on friction coefficient of Cu-graphite composite system. In TECHNOLÓGIA 2009. Editor Viliam Hrnčiar. - Bratislava : STU, 2009. ISBN 978-80-227-3135-5.

GEBURA, Marek - LAPIN, Juraj. Instability of γ/γ´ microstructure in a nickel-based single crystal superalloy during ageing. In TECHNOLÓGIA 2009. Editor Viliam Hrnčiar. - Bratislava : STU, 2009, s.28-35. ISBN 978-80-227-3135-5.

PIDÍK, Andrej - NOSKOVIČ, Jaroslav - ROCH, T. - MIKULA, Marian - PLECENÍK, T. - PLECENÍK, Andrej - KÚŠ, P. Structural properties of boron thin films prepared by magnetron sputtering. In 17th Conference of Slovak Physicists, Bratislava, 16.-19.9. 2009 : proceedings. Ed. Marián Reiffers. - Bratislava : Slovak Physical Society, 2009, s.173-174. ISBN 978-80-969124-7-6.

STEIN, George Juraj - CHMÚRNY, Rudolf - ROSÍK, Vladimír. Compact Vibration Measuring System for In- Vehicle Applications. In MEASUREMENT 2009 : international conference on measurement. Editor Milan Tyšler, Ján Maňka, Viktor Witkovský. - Bratislava : Institute of Measurement Science SAS, 2009, s.298-301. ISBN 978-80-969672-1-6.

STEIN, Juraj. Compact Measuring System for Vibration Measurements. In Noise and Vibration and Practice : proceedings of the 14th international acoustic conference. Editor Stanislav Žiaran. - Bratislava : STU - strojnícka fakulta, 2009, s.77-80. ISBN 978-80-227-3093-8.

KAVECKÝ, Štefan - DVORÁK, Tomáš - IŽDINSKÝ, Karol - ŠTEFÁNIK, Pavol. Vplyv žíhania na vlastnosti volfrámových drôtov v kovových kompozitoch. In FRAKTOGRAFIA 2009. Editor Ján Dusza, Pavol Hvizdoš. - Košice : Institute of Materials Research of the SAS, 2009, s.243-247.

HRNČIAR, V. - LAPIN, Juraj - DEMIAN, Svetozár - ŠVEC, Pavol. Príprava intermetalickej zliatiny Ti-Al-Ta : Preparation of intermetallic alloy Ti-Al-Ta. In TECHNOLÓGIA 2009. Editor Viliam Hrnčiar. - Bratislava : STU, 2009, s.43-48. ISBN 978-80-227-3135-5.

MIKULA, Marian - GRANČIČ, B. - ROCH, T. - VÁVRA, Ivo - BURŠÍKOVÁ, Vilma - ŠATKA, A. - PLECENIK, Andrej - KÚŠ, P. Coatings for industrial applications. In 17th Conference of Slovak Physicists, Bratislava, 16.-19.9. 2009 : proceedings. Ed. Marián Reiffers. - Bratislava : Slovak Physical Society, 2009, s.23-28. ISBN 978-80-969124-7-6.

BESTERCI, Michal - VELGOSOVÁ, Oksana - IVAN, Jozef - HVIZDOŠ, Pavol - KVAČKAJ, Tibor - SÜLLEIOVÁ, Katarína. The fracture method of "in situ" Al-Al4C3 nanomaterials. In Fraktografia 2009 : proceedings of the conference with international participation. Stará Lesná, 8.-11.11.2009. Eds. Ján Dusza, Pavol Hvizdoš. - Košice : IMR SAS, 2009, p. 311-315. ISBN 978-80-968543-8-7. Názov z CD. CD-ROM.

KVAČKAJ, M. - VELGOSOVÁ, Oksana - IVAN, Jozef - KULU, Priit - KVAČKAJ, Tibor - BIDULSKÁ, Jana. The fracture method of "in situ" Al-Al4C3 nanomaterials. In Fraktografia 2009 : proceedings of the conference with international participation. Stará Lesná, 8.-11.11.2009 [elektronický zdroj]. Eds. Ján Dusza, Pavol Hvizdoš. - Košice : IMR SAS, 2009, p. 311-315. ISBN 978-80-968543-8-7. Názov z CD. CD-ROM.

ŠTEFÁNIK, Pavol - BERONSKÁ, Naďa - IŽDINSKÝ, Karol - ZEMÁNKOVÁ, Milina - KAVECKÝ, Štefan. Influence of thermal cycling on microstructure of metal matrix composites with carbon fibres. In FRAKTOGRAFIA 2009. Editor Ján Dusza, Pavol Hvizdoš. - Košice : Institute of Materials Research of the SAS, 2009, s.237-241.

STEIN, George Juraj - ZAHORANSKÝ, Radúz. Simulation of simple oscillatory systems with viscous and dry-friction damping under reality-like random kinematical excitation. In Vehicle System Dynamics, Identification and Anomalies : mini conference. Editor István Zobory. - Budapest : University of Technology and Economics, 2008, s.47-54. ISBN 978 963 420 968 3.

ŠTEFÁNIK, Pavol. Galvanické niklovanie uhlíkových vlákien pre použitie v kompozitoch s polymérnou matricou so zlepšeným elektromagnetickým tienením = Galvanic nickel coating of carbon fibres for application in polymer matrix composites with increasing electromagnetic shielding. In Medzinárodná galvanická konferencia : zborník prednášok. - Bratislava : STU, 2009, s.35-43. ISBN 978-80-227-3098-3.

MIKULA, Marian - GRANČIČ, B. - VÁVRA, Ivo - ŠATKA, A. - BURŠÍKOVÁ, Vilma - KÚŠ, P. Tvrdé a supertvrdé vrstvy pripravené PVD technológiami = Hard and superhard coatings prepared by PVD technologies. In Medzinárodná galvanická konferencia : zborník prednášok. - Bratislava : STU, 2009, s.12-19. ISBN 978-80-227-3098-3.

SIMANČÍK, František - CHUDOBA, Štefan. Manažment tvorby a využívania technológií a techniky, ich vplyv na výrobu produktov uspokojujúcich potreby ľudí, zamestnanosť a prírodu. In Súčasné a budúce úlohy manažmentu : predpoklady, možnosti a obmedzenia uplatňovania manažmentu pri riešení problémov ľudskej civilizácie. Zostavili Alena Uchnárová, Katarína Betíková. - Bratislava : Slovenská akadémia manažmentu, 2009, s.17-28. ISBN 978-80-89238-25-5.

BERONSKÁ, Naďa. Thermal conductivity and thermal expansion of copper matrix composites reinforced. In 5th international conference on diffusion in solids and liquids - mass transfer, heat transfer and microstructure and properties. - Rome : DSL, 2009, s.22. Názov z CD ROM.

DVORÁK, Tomáš. Thermal expansion of advanced materials for high temperature fusion applications. In 5th international conference on diffusion in solids and liquids - mass transfer, heat transfer and microstructure and properties. - Rome : DSL, 2009, s.54. Názov z CD ROM.

GEBURA, Marek - LAPIN, Juraj. Microsegregation induced inhomogeneity of coarsening of γ´ precipitates in a nickel base single crystal superalloy. In 5th international conference on diffusion in solids and liquids - mass transfer, heat transfer and microstructure and properties. - Rome : DSL, 2009, s.356-357. Názov z CD ROM.

KUŚNIERZ, Jan - PAWEŁEK, Andrzej - KÚDELA, Stanislav, Jr. - PIĄTKOWSKI, Andrzej - MIZERA, Jarosłav - RANACHOWSKI, Zbigniew - KÚDELA, Stanislav - JASIEŃSKI, Zdzisław. Mechanical and Acoustic Emission Behaviour in Compressed Mg-Li and Al Alloys Predeformed by Intensive Strain Methods. In ISPMA 11 : international symposium on physics of materials. - Prague : Facultas Mathematica Physicaque, 2008, s.75.

PINTSUK, G. - CASALEGNO, V. - FERRARIS, M. - GRATTAROLA, M. - GUALCO, C. - IŽDINSKÝ, Karol - KOPITZ, T. - SALVO, M. - SIMANČÍK, František - LINKE, J. High heat flux testing of tungsten and CFC mock-ups produced within the EXTREMAT project. In 12th International Workshop on Plasma Facing Materials and Components for Fusion Applications. - Jülich : Forschungszentrum, 2009, s. 94.

ŠEBO, Pavol - JANIČKOVIČ, Dušan. Influence of Sb and Cu in Sn-Sb-Cu alloys on weeting of Cu and Cu-solder-Cu joint strength. In Advanced Solder Materials for High Temperature Application : COST Action MP0602. - Genoa : National Research Council IENI, 2009, p. 7.

ŠEBO, Pavol - JANIČKOVIČ, Dušan - ILLEKOVÁ, Emília. Influence of indium and copper in Sn3.5Ag0.4Culn solder on its interaction with copper. In Advanced solder materials for high temperature application. - Bochum : ICAMS, 2009, s.30.

ADAMČÍKOVÁ, Andrea - TARABA, Bohumil - KOVÁČIK, Jaroslav. A study of porosity influence on thermal diffusivity of aluminium foam by experimental analysis and numerical simulation. In 5th international conference on diffusion in solids and liquids - mass transfer, heat transfer and microstructure and properties. - Rome : DSL, 2009, s.187-188. Názov z CD ROM.

BERONSKÁ, Naďa - DVORÁK, Tomáš - IŽDINSKÝ, Karol - ŠTEFÁNIK, Pavol. Mechanical and thermal properties of copper matrix composites reinforced with continuous high modulus carbon fibres/continuous tungsten wires. In Mikroskopia 2009. - Brno : Tribun EU s.r.o., 2009, s.16. ISBN 978-80-7399-739-7.

GEBURA, Marek. Lopatky vysokotlakového stupňa spaľovacích turbínových motorov. In Materials engineer. - Bratislava : ENTOS, 2008. ISSN 1337-8953.

GEBURA, Marek. Zvýraznenie štruktúrnych oblastí pomocou programu Gimp. In Materials engineer. - Bratislava : ENTOS, 2008. ISSN 1337-8953.

EMMER, Štefan - KOVÁČIK, Jaroslav - BIELEK, Jozef. Wear resistance of particulate Cu-graphite composite system. In EUROMAT 2009. - Glasgow : FEMS, 2009.

GABALCOVÁ, Zuzana - LAPIN, Juraj. Solidification behaviour of a new air hardenable Ti-46Al-8Ta alloy studied by directional solidification. In EUROMAT 2009. - Glasgow : FEMS, 2009.

SIMANČÍK, František. Recent Developments in Manufacturing and Use of Foamed Metals. In EUROMAT 2009. - Glasgow : FEMS, 2009.

IŽDINSKÝ, Karol - ŠTEFÁNIK, Pavol - SIMANČÍK, František - BERONSKÁ, Naďa - DVORÁK, Tomáš - KÚDELA, Stanislav, Jr. - KORÁB, Juraj. The effect of strong and weak interfaceon thermophysical properties of metal matrix composites reinforced with high modulus and high thermal conductivity C fibres. In EUROMAT 2009. - Glasgow : FEMS, 2009.

BERONSKÁ, Naďa - IŽDINSKÝ, Karol - ŠTEFÁNIK, Pavol - DVORÁK, Tomáš - SIMANČÍK, František. The effect of Cr content on thermal expansion and thermal conductivity of Cu matrix composites reinforced with unidirectionally aligned continuous K 1100 C fibres. In EUROMAT 2009. - Glasgow : FEMS, 2009.

DVORÁK, Tomáš - KORÁB, Juraj - KAVECKÝ, Štefan - ŠTEFÁNIK, Pavol - SIMANČÍK, František - IŽDINSKÝ, Karol - PINTSUK, Gerald. The potential of W wire - Cu matrix composites in future divertor mock-up design. In EUROMAT 2009. - Glasgow : FEMS, 2009.

NOSKO, Martin - SIMANČÍK, František - FLOREK, Roman - TOBOLKA, Peter. New manufacturing route for cheaper aluminium foam. In EUROMAT 2009. - Glasgow : FEMS, 2009.

LAPIN, Juraj - GABALCOVÁ, Zuzana - DALOZ, Dominique - ZOLLINGER, Julien. Experimental study of solidification behaviour of intermetallic Ti-46Al-8Nb and Ti-46Al-8Ta alloys. In EUROMAT 2009. - Glasgow : FEMS, 2009.