KOVÁČIK, Jaroslav - EMMER, Š. - BIELEK, J. Thermal conductivity of Cu-graphite composites. In International Journal of Thermal Sciences, 2015, vol. 90, p. 298-302. (2.629 - IF2014). (2015 - Current Contents). ISSN 1290-0729.
MÚČKA, Peter - GAGNON, L. Influence of tyre-road contact model on vehicle vibration response. In Vehicle System Dynamics, 2015, vol. 53, iss. 9, p. 1227-1246. ISSN 0042-3114.
MÚČKA, Peter. Model of coherence function of road unevenness in parallel tracks for vehicle simulation. In International Journal of Vehicle Design, 2015, vol. 67, no. 1, p. 77 - 97. (0.405 - IF2014). (2015 - Current Contents). ISSN 0143-3369.
NAGY, Štefan - NOSKO, Martin - OROVČÍK, Ľubomír - IŽDINSKÝ, Karol - KÚDELA, Stanislav, Jr. - KRÍŽIK, Peter. Pre-review study of the aluminum/alumina master alloy made through pressure infiltration : Short communication. In Materials and Design, 2015, vol. 66 Part A, p. 1-6. (3.501 - IF2014). (2015 - Current Contents). ISSN 0261-3069.
RANACHOWSKI, Z. - JÓŹWIAK-NIEDŹWIEDZKA, D. - RANACHOWSKI, P. - DABROWSKI, M. - KÚDELA, Stanislav, Jr. - DVORÁK, Tomáš. The determination of diffusive tortuosity in concrete specimens using X-ray microtomography. In Archives of Metallurgy and Materials, 2015, vol. 60, iss. 2, p. 1115-1119. ISSN 1733-3490.
KHODABAKHSHI, F. - SIMCHI, A. - KOKABI, A. H. - GERLICH, A. P. - NOSKO, Martin. Effects of stored strain energy on restoration mechanisms and texture components in an aluminum-magnesium alloy prepared by friction stir processing. In Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 2015, vol. 642, p. 204-214. ISSN 0921-5093.
KHODABAKHSHI, F. - SIMCHI, A. - KOKABI, A.H. - ŠVEC, Peter - SIMANČÍK, František - GERLICH, A.P. Effects of nanometric inclusions on the microstructural characteristics and strengthening of a friction-stir processed aluminum-magnesium alloy. In Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 2015, vol. 642, p. 215-229. (2.567 - IF2014). (2015 - Current Contents). ISSN 0921-5093.
OROVČÍK, Ľubomír - NOSKO, Martin - ŠVEC, Peter - NAGY, Štefan - ČAVOJSKÝ, Miroslav - SIMANČÍK, František - JERZ, Jaroslav. Effect of the TiH2 pre-treatment on the energy absorption ability of 6061 aluminium alloy foam. In Materials Letters, 2015, vol. 148, p. 82-85. (2.489 - IF2014). (2015 - Current Contents). ISSN 0167-577X.
KAVECKÝ, Štefan - VALÚCHOVÁ, Jana - ČAPLOVIČOVÁ, Mária - HEISSLER, Stefan - ŠAJGALÍK, Pavol - JANEK, Marián. Nontronites as catalyst for synthesis of carbon nanotubes by catalytic chemical vapor deposition. In Applied Clay Science, 2015, vol. 114, p. 170-178. (2.467 - IF2014). (2015 - Current Contents). ISSN 0169-1317.
BALOG, Martin - HU, Tao - KRÍŽIK, Peter - CASTRO RIGLOS, Maria Victoria - SALLER, Brandon D. - YANG, Hanry - SCHOENUNG, Julie M. - LAVERNIA, Enrique J. On the thermal stability of ultrafine-grained Al stabilized by in-situ amorphous Al2O3 network. In Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 2015, vol. 648, p. 61-71. ISSN 0921-5093.
JANÁK, Marián - FROITZHEIM, Nikolaus - YOSHIDA, Kenta - SASINKOVÁ, Vlasta - NOSKO, Martin - KOBAYASHI, T. - HIRAJIMA, Takao - VRABEC, Mirijam. Diamond in metasedimentary crustal rocks from Pohorje, Eastern Alps: a window to deep continental subduction. In Journal of Metamorphic Geology, 2015, vol. 33, p. 495-512. (4.147 - IF2014). (2015 - Current Contents). ISSN 0263-4929.
PANGALLO, Domenico - BUČKOVÁ, Mária - KRAKOVÁ, Lucia - PUŠKÁROVÁ, Andrea - ŠAKOVÁ, Nikoleta - GRIVALSKÝ, Tomáš - CHOVANOVÁ, Katarína - ZEMÁNKOVÁ, Milina. Biodeterioration of epoxy resin: a microbial survey through culture-independent and culture-dependent approaches. In Environmental microbiology, 2015, vol. 17, iss. 2, p. 462–479. (6.201 - IF2014). (2015 - Current Contents). ISSN 1462-2912.
EMMER, Š. - BAKSA, P. - KOVÁČIK, Jaroslav. Effect of microstructure on the sonotrode properties of tool materials Ferro-titanit WFN and steel CPM 10V. In Kovové materiály, 2015, roč. 53, s. 423-428. ISSN 0023-432X. Dostupné na internete: .
KLIMAN, Vladimír - CHMELKO, V. - MARGETIN, M. Analysis of the notch effect of welded joint and of grinding effect. In Kovové materiály, 2015, roč. 53, s. 429-441. ISSN 0023-432X. Dostupné na internete: .
MOONEY, R. P. - HECHT, U. - GABALCOVÁ, Zuzana - LAPIN, Juraj - MCFADDEN, S. Directional solidification of a TiAl alloy by combined Bridgman and power-down technique. In Kovové materiály, 2015, roč. 53, s. 187-197. ISSN 0023-432X.
PELACHOVÁ, Tatiana - LAPIN, Juraj. Cyclic oxidation behaviour of intermetallic Ti-46Al-8Ta alloy in air. In Kovové materiály, 2015, roč. 53, s. 415-422. ISSN 0023-432X. Dostupné na internete: .
ŠTAMBORSKÁ, Michaela - LAPIN, Juraj - BAJANA, Otto - LOSERTOVÁ, M. Tensile deformation behaviour of ferritic-pearlitic steel studied by digital image correlation method. In Kovové materiály, 2015, roč. 53, s. 399-407. ISSN 0023-432X. Dostupné na internete: .
BERONSKÁ, Naďa - IŽDINSKÝ, Karol - ŠTEFÁNIK, Pavol - KÚDELA, Stanislav - DVORÁK, Tomáš - SIMANČÍK, František - HÁJOVSKÁ, Zuzana - RUSNÁK, Andrej. The microstructure and thermal expansion of Mg/C composite prepared by gas pressure infiltration. In Kovové materiály, 2015, roč. 53, s. 451-458. (0.406 - IF2014). (2015 - Current Contents, MSCI). ISSN 0023-432X. Dostupné na internete: .
KAVECKÝ, Štefan - ŠTEFÁNIK, Pavol - IŽDINSKÝ, Karol - NAGY, Štefan - ŠEBO, Pavol - BERONSKÁ, Naďa - OPÁLEK, Andrej. Erosion resistance of copper/alumina composite. In Kovové materiály, 2015, roč. 53, s. 463-470. (0.406 - IF2014). (2015 - Current Contents, MSCI). ISSN 0023-432X. Dostupné na internete: .
IŽDINSKÝ, Karol - SENČEKOVÁ, Lucia - SIMANČÍK, František - BERONSKÁ, Naďa - ŠVEC, P. Mo/Mo silicide composites prepared by pressure-assisted reactive infiltration. In Kovové materiály, 2015, roč. 53, s. 391-397. ISSN 0023-432X. Dostupné na internete: .
KVÍČALA, M. - HENDRYCH, A. - ŠTAMBORSKÁ, M. - VOLODARSKAJA, A. - SKOTNICOVÁ, K. - ČEGAN, Tomáš - JUŘICA, J. Low-cost method of the highly porous iron sintering. In Kovové materiály, 2015, roč. 53, s. 161-165. ISSN 0023-432X.
ČEGAN, Tomáš - SZURMAN, I. - KURSA, M. - HOLEŠINSKÝ, J. - VONTOROVÁ, J. Preparation of TiAl-based alloys by induction melting in graphite crucibles. In Kovové materiály, 2015, roč. 53, s. 69-78. ISSN 0023-432X.
MÚČKA, Peter. Medzinárodný index nerovnosti IRI a jazdný komfort. In Silniční obzor, 2015, roč. 76, č. 7-8, s. 199-204. ISSN 0322-7154.
LAPIN, Juraj - PELACHOVÁ, Tatiana. Influence of annealing on the microstructure of cast TiAl-based alloy. In Journal of Achievements in Materials and Manufacturing Engineering, 2015, vol. 65, iss. 2, p. 53-60. ISSN 1734-8412. Názov prebraný z titulnej obrazovky. Dostupné na internete: .
JERZ, Jaroslav - TOBOLKA, Peter - MICHENKA, Václav - DVORÁK, Tomáš. Heat storage in future zero-energy buildings. In International Journal of Innovative Research in Science, Engineering and Technology, 2015, vol. 4, iss. 8, p. 6722-6728. ISSN 2319-8753. Názov prebraný z titulnej obrazovky. Dostupné na internete: .
KOVÁČIK, Jaroslav - EMMER, Štefan. Sintering of HDH Ti powder. In Scientific Proceedings 2014, 2014, vol. 22, p. 69-74. ISSN 1338-1954.
EMMER, Štefan - BAKSA, Peter - KOVÁČIK, Jaroslav. Surface treatment of sonotrode material AW 7075. In Scientific Proceedings 2014, 2014, vol. 22, p. 23-28. ISSN 1338-1954.
BAKSA, Peter - EMMER, Štefan - KOVÁČIK, Jaroslav. Optimisation of parameters and effectiveness of materials transfer during ESD deposition of WC8Co on Cu substrate. In Scientific Proceedings 2014, 2014, vol. 22, p. 9-14. ISSN 1338-1954.
ŠTAFURA, Andrej - NAGY, Štefan - BERONSKÁ, Naďa. Organový pozitív v Sáse a význam komplexného organologického výskumu [The Positive Organ in Sása and the Significance of Complex Organological Research.]. In Musicologica Slovaca, 2015, roč. 6 [32], č. 2, s. 215-249. (2015 - RILM, CEJSH). ISSN 1338-2594.
BERONSKÁ, Naďa - KOLLAROVIČOVÁ, Andrea - ŠTEFÁNIK, Pavol - IŽDINSKÝ, Karol. Technológia prípravy kovových kompozitných materiálov metódou "cold spray" = Technology of composite materials preparing by "cold spray" technology. In Technológ, 2015, roč. 7, č. 3, p. 120-124. ISSN 1337-8996.
KOLLAROVIČOVÁ, Andrea - BERONSKÁ, Naďa - ŠTEFÁNIK, Pavol - IŽDINSKÝ, Karol. Zmena štruktúry elektródy pripravenej z Cu zliatiny alebo Cu-W kompozitu po expozícii v plazmovom výboji = Structure change of the electrode prepared from Cu alloy or Cu-W composite after exposition in plasma discharge. In Technológ, 2015, roč. 7, č. 3, p. 132-136. ISSN 1337-8996.
KLIMOVÁ, Alena - LAPIN, Juraj. Effect of oxygen on the microstructure of annealed TiAl based alloy. In Archives of Materials Science and Engineering, 2014, vol. 70, p. 21-27. ISSN 1897-2764.
MOONEY, R. P. - LAPIN, Juraj - KLIMOVÁ, Alena - MCFADDEN, S. Conditions for CET in a gamma TiAl alloy. In IOP Conference Series: Materials Science and Engineering, 2015, vol. 84, 012088. ISSN 1757-899X. Názov prebraný z titulnej obrazovky. Dostupné na internete: .
MÚČKA, Peter. Sensitivity of road unevenness indicators to distresses of composite pavements. In International journal of pavement engineering, 2015, vol. 8, no. 2, p. 72-84. (0.706 - IF2014). (2015 - Current Contents). ISSN 1029-8436. Názov prebraný z titulnej obrazovky. Dostupné na internete: .
CHMELKO, V. - KLIMAN, Vladimír - GARAN, M. In-time monitoring of fatigue damage. Ed. J. Papuga, M. Ružička. In Procedia Engineering : Special Issues, 2015, vol. 101, p. 93 - 100. ISSN 1877-7058. Názov prebraný z titulnej obrazovky. Dostupné na internete: .
ŠPANIELKA, Ján - ŠKROBIAN, Milan - BIDULSKÝ, Róbert. Extrusion of short aluminium billets - simulation and semi-pilot test. In Acta Metallurgica Slovaca, 2015, vol.21, no. 2, p. 164-170. ISSN 1335-1532.
LAPIN, Juraj - GABALCOVÁ, Zuzana - BAJANA, Otto - PELACHOVÁ, Tatiana - STANEKOVÁ, Hana - FRKÁŇOVÁ, Katarína. Microstructure and properties of cast Ti-46Al-8Ta alloy. In Gamma Titanium Aluminide Alloys 2014 : A collection of research on innovation and commercialization of gamma alloy technology. - Hoboken, New Jersey : John Wiley and Sons, 2014, s. 179-188. ISBN 978-1-118-99558-7.
KLIMOVÁ, Alena - LAPIN, Juraj - ČIČMAN, Ján. Contamination of TiAl-based castings from oxide crucibles and moulds. Ed. S. Jozić, B. Lela. In Mechanical Technologies and Structural Materials 2015 : International conference. Split, Croatia, September 24-25, 2015. Proceedings. - Split : Croatian Society for Mechanical Technologies, 2015, s. 61-66. ISSN 1847-7917.
PELACHOVÁ, Tatiana - LAPIN, Juraj. Cyclic oxidation behaviour of Ti-46Al-8Ta (at.%). Ed. S. Jozić, B. Lela. In Mechanical Technologies and Structural Materials 2015 : International conference. Split, Croatia, September 24-25, 2015. Proceedings. - Split : Croatian Society for Mechanical Technologies, 2015, s. 131-136. ISSN 1847-7917.
RANACHOWSKI, Zbigniew - JÓŹWIAK-NIEDŹWIEDZKA, Daria - RANACHOWSKI, Przemyslaw - DABROWSKI, Mariusz - KÚDELA, Stanislav, Jr. - DVORÁK, Tomáš. Analysis of pore distribution and connectivity in concrete using X-ray microtomography. Ed. A. M. Brandt, J. Olek, M. A. Glinicki, Ch. K. Y. Leung, J. Lis. In Brittle Matrix Composites 11 : International symposium. Warsaw, Poland, September 28-30. Proceedings. - Warsaw : Institute of Fundamental Technological Research, 2015, s. 203-212. ISBN 978-83-89687-96-8.
ŠTAMBORSKÁ, Michaela - LAPIN, Juraj - BAJANA, Otto - LOSERTOVÁ, Monika. Application of DIC method for assessment of tensile deformation of medium carbon steel. Ed. S. Jozić, B. Lela. In Mechanical Technologies and Structural Materials 2015 : International conference. Split, Croatia, September 24-25, 2015. Proceedings. - Split : Croatian Society for Mechanical Technologies, 2015, s. 161-166. ISSN 1847-7917.
KOLLAROVIČOVÁ, Andrea - BERONSKÁ, Naďa - ŠTEFÁNIK, Pavol - IŽDINSKÝ, Karol. Al-limestone composite coatings prepared by CS process. Ed. S. Jozić, B. Lela. In Mechanical Technologies and Structural Materials 2015 : International conference. Split, Croatia, September 24-25, 2015. Proceedings. - Split : Croatian Society for Mechanical Technologies, 2015, s. 67-71. ISSN 1847-7917.
LAPIN, Juraj - PELACHOVÁ, Tatiana - ADAMČÍKOVÁ, Andrea - ZEYTIN, Havva Kazdal. Solidification behavior of Ni-based CMSX-4 superalloy studied by directional solidification. Ed. S. Jozić, B. Lela. In Mechanical Technologies and Structural Materials 2015 : International conference. Split, Croatia, September 24-25, 2015. Proceedings. - Split : Croatian Society for Mechanical Technologies, 2015, s. 93-99. ISSN 1847-7917.
KRÍŽIK, Peter - BALOG, Martin - NOSKO, Martin - BAJANA, Otto - ŠVEC, Peter, Sr. Formation of interfacial bonding between native amorphous Al2O3 layers in cold forged Al powder. Ed. D. Ćorić, I. Žmak. In MATRIB 2015 : International conference. Vela Luka, Croatia, 25-27 June 2015. Proceedings [elektronický zdroj]. - Zagreb : Hrvatsko društvo za materijale i tribologiju, 2015, s. 213-220. ISSN 1848-5359. Názov prebraný z pretlače na CD-ROM.
ŠTĚPÁNEK, Matěj - BALOG, Martin - KRÍŽIK, Peter - OROVČÍK, Ľubomír - SIMANČÍK, František. Design and testing protype pistons made of HITEMAL (powder metallurgy aluminium). Ed. D. Ćorić, I. Žmak. In MATRIB 2015 : International conference. Vela Luka, Croatia, 25-27 June 2015. Proceedings [elektronický zdroj]. - Zagreb : Hrvatsko društvo za materijale i tribologiju, 2015, s. 318 - 327. ISSN 1848-5359. Názov prebraný z pretlače na CD-ROM.
BAJANA, Otto - ŠTEFKO, Patrik - ADAMČÍKOVÁ, Andrea - PETRÍK, Peter. Investigation of possibilities of application of nonlinear elastic wave spectroscopy for detection of turbine condenser´s cooling tubes damage. Ed. D. Ćorić, I. Žmak. In MATRIB 2015 : International conference. Vela Luka, Croatia, 25-27 June 2015. Proceedings [elektronický zdroj]. - Zagreb : Hrvatsko društvo za materijale i tribologiju, 2015, s. 29-37. ISSN 1848-5359. Názov prebraný z pretlače na CD-ROM.
KAVECKÝ, Štefan - NAGY, Štefan - ŠTEFÁNIK, Pavol. Ablation resistance study of copper tungsten composite using spectroscopic methods. In Powder Metallurgy Progress, 2015, vol. 15, p. 156-161, special issue. ISSN 1335-8987.
BALOG, Martin. HITEMAL. In Mikroskopie 2015 : Konferencia CSMS. Lednice na Moravě, 12.-13. 5. 2015. Zborník abstraktov [elektronický zdroj]. - Praha : Československá mikroskopická společnost, 2015, s. 15-16. Názov prebraný z titulnej obrazovky. Dostupné na internete: .
BALLÓKOVÁ, Beáta - BESTERCI, Michal - SÜLLEIOVÁ, Katarína - BALOG, Miroslav - HUANG, Song-Jeng. Effects of ECAP on the mechanical properties of Mg-Al2O3 nanocomposites. In AMME´2015 : 22nd winter international scientific conference on achievements in mechanical and materials engineering Winter-AMME´15. Gliwice - Zakopane, 6.-9.12.2015. Ed. L.A. Dobrzanski. - Gliwice, 2015, p. 43. ISBN 978-83-63553-39-5.
NOSKO, Martin - OROVČÍK, Ľubomír - BALOG, Martin - KRÍŽIK, Peter - ČEGAN, Tomáš. Characterization of ultra fine grained microstructures using EBSD method. In 12th Multinational Congress on Microscopy (MCM 2015), August 23-28, 2015, Eger, Hungary : Abstracts. - Budapest : Akadémiai Kiadó / AK Congress, 2015, p. 68-70.
ŠIŠKOVÁ, Alena - DUBAJ, T. - OPÁLEK, Andrej - KLEINOVÁ, Angela - RYCHTER, P. - ECKSTEIN, Anita. Functionalizing electrospun fibers with active molecules. In Challenges in Science and Technology of Polymer Materials : Bansko, Bulgaria, May 19-23, 2015 : BOOK OF ABSTRACTS. - Bansko, Bulgaria, 2015, non p., O19.
ČÍKOVÁ, Eliška - ŠIŠKOVÁ, Alena - OPÁLEK, Andrej - OMASTOVÁ, Mária. Electronspun poly(e-caprolactone) fibers: Effects of processing on fiber morphology. In Applications of Electrospinning in Composites, Nanofabrication, Food, Packaging, Pharma and Controlled Release : COST MP1206 Electrospinning : Novi Sad, Serbia, 25th-27th March 2015 : program and book of abstracts. - Novi Sad, Serbia : Tehnološki fakultet, 2015, p. 81. ISBN 978-86-6253-043-1.
STEIN, Juraj - TOBOLKA, Peter - CHMÚRNY, Rudolf. Preliminary investigations of machine frame vibration damping using eddy current principle : extended abstract. Ed. J. Náprstek, C. Fischer. In ENGINEERING MECHANICS 2015 : 21st International conference. Svratka, Czech Republic, May 11-14, 2015. - Prague : Institute of Theoretical and Applied Mechanics, Academy of Sciences of the Czech Republic, 2015, s. 130-131. ISBN 978-80-86246-42-0.
VISKIC, J. - CATIC, A. - SCHAUPERL, Z. - BALOG, Martin - KRÍŽIK, Peter - MEHULIC, K. Effects of surface treatment of powder metallurgy manufactured titanium on bond strenght to veneering ceramics. In CED-IADR 2015 : 47th Meeting of the Continental European Division of the International Association for Dental Research (CED-IADR) co-hosted by the Scandinavian Division (NOF). Belek-Antalya, October 15-17, 2015 [abstracts], s. 15. Dostupné na internete: .
VISKIC, Josko - CATIC, Amir - SCHAUPERL, Zdravko - BALOG, Martin - KRÍŽIK, Peter - MEHULIC, Ketij. Fracture surface analysis of PM CP titanium after ceramic debonding. Ed. H. Hubálková, M. Bartoňová. In 39th Annual Conference of the European Prosthodontic Association : 39th Annual conference. Prague, Czech Republic, September 3-5, 2015. - Prague : Czech Society of Prosthetic Dentistry and Czech Dental Chamber, 2015, s. 36. ISBN 978-80-260-8581-2. Dostupné na internete: .
KOVÁČIK, Jaroslav - BAKSA, Peter - EMMER, Štefan. Electro spark deposition of hard wear resistant layers on Ti alloys. Ed. E. Spišák, A. Guzanová, Ľ. Kaščák, Ľ. Dulebová. In PRO-TECH-MA 2015 - SURFACE ENGINEERING 2015 : International scientific conference. The High Tatras, Slovakia, 7-9 October, 2015. Extended abstracts [elektronický zdroj]. - Košice : Technical University of Košice, 2015, s. 46-47. ISBN 978-80-553-2204-9. Názov prebraný z pretlače na CD-ROM.
ŠTEFÁNIK, Pavol - KAVECKÝ, Štefan - IŽDINSKÝ, Karol - BERONSKÁ, Naďa - OPÁLEK, Andrej. Structure change of composite prepared by infiltration of Al2O3 preform with CuAgZr alloy after plasma exposition. Ed. B. Ballóková, K. Ondrejová. In Fraktografia - Fractography 2015 : International conference. Book of abstracts. Stará Lesná, 18.-21.10.2015. - Košice : Institute of Materials Research SAS, 2015, p16.
NAGY, Štefan - NOSKO, Martin - MAŤKO, Igor. Particle-matrix interface characteristics of infiltrated Al2O3 particles with aluminium alloys. In 12th Multinational Congress on Microscopy ( MCM 2015), August 23-28, 2015, Eger, Hungary : Abstracts. - Budapest : Akademiai Kiadó/ AK Congress, 2015, p. 533-534.
OROVČÍK, Ľubomír - JERZ, Jaroslav - DVORÁK, Tomáš - NOSKO, Martin. Effect of pre-treatment of the TiH2 on the surface changes and the phases formation. In 12th Multinational Congress on Microscopy (MCM 2015), August 23-28, 2015, Eger, Hungary : Abstracts. - Budapest : Akadémiai Kiadó / AK Congress, 2015, p. 557.
BALOG, Martin - VISKIC, Josko - KRÍŽIK, Peter - SCHAUPERL, Zdravko - SNAJDAR, Mateja - STANEC, Zlatko - CATIC, Amir. CP Ti fabricated by low temperature extrusion of HDH powder: application in dentistry. In PM Titanium 2015 : The 3rd Conference on Powder Processing, Consolidation and Metallurgy of Titanium. Abstracts. Lüneburg, Germany, 31.8.-3.9.2015. - Geesthacht, Germany : Helmholtz-Zentrum Geesthacht, 2015, p. 45.
ŠVEC, Peter Jr. - ZIGO, Juraj - JANOTOVÁ, Irena - MAŤKO, Igor - ČAVOJSKÝ, Miroslav - JANIČKOVIČ, Dušan - MARCIN, Jozef - ŠKORVÁNEK, Ivan - ŠVEC, Peter. New rapidly quenched alloy systems and their processing. In ISMANAM 2015 : 22nd International Symposium on Metastable, Amorphous and Nanostructured Materials, July 13-17, 2015, Paris, France. Book of Abstracts. - Paris, 2015, p. 93.
ZIGO, Juraj - ŠVEC, Peter Jr. - JANOTOVÁ, Irena - MAŤKO, Igor - ČAVOJSKÝ, Miroslav - JANIČKOVIČ, Dušan - ŠVEC, Peter. Enhancement of Si content in rapidly quenched Al-Si based systems containin transition elements. In ISMANAM 2015 : 22nd International Symposium on Metastable, Amorphous and Nanostructured Materials, July 13-17, 2015, Paris, France. Book of Abstracts. - Paris, 2015, p. 240.
ČAVOJSKÝ, Miroslav - ŠVEC, Peter - ŠVEC, Peter Jr. - ZIGO, Juraj - MAŤKO, Igor - SIMANČÍK, František. The annealing behaviour of rapid solidification processed Al-Mo-Fe alloys. In ISMANAM 2015 : 22nd International Symposium on Metastable, Amorphous and Nanostructured Materials, July 13-17, 2015, Paris, France. Book of Abstracts. - Paris, 2015, p. 294.
JANIČKOVIČ, Dušan - ŠVEC, Peter Jr. - MAŤKO, Igor - NOSKO, Martin - JANOTOVÁ, Irena - ZIGO, Juraj - ŠVEC, Peter. Amorphous Ni-based composite prepared by direct melt-spinning. In ISMANAM 2015 : 22nd International Symposium on Metastable, Amorphous and Nanostructured Materials, July 13-17, 2015, Paris, France. Book of Abstracts. - Paris, 2015, p. 295.
ČEGAN, Tomáš - LAPIN, Juraj - SZURMAN, Ivo - NOSKO, Martin. The effect of ageing on microstructure and microhardness of fully lamellar Ti-45Al-5Nb-0.2B-0.75C alloy. In METAL 2015 : 24th International Conference on Metallurgy and Materials. Hotel Voronez I, Brno, Czech Republic, 3-5 June 2015. Full texts of papers [elektronický zdroj]. - Ostrava : TANGER Ltd., 2015, s. 1-6. ISBN 978-80-87294-58-1. Názov prebraný z pretlače na CD-ROM.
SZURMAN, Ivo - ČEGAN, Tomáš - KURSA, Miroslav. Preparation of alloys based on intermetallic compounds by VIM with centrifugal casting. In METAL 2015 : 24th International Conference on Metallurgy and Materials. Hotel Voronez I, Brno, Czech Republic, 3-5 June 2015. Full texts of papers [elektronický zdroj]. - Ostrava : TANGER Ltd., 2015, s. 1-6. ISBN 978-80-87294-58-1. Názov prebraný z pretlače na CD-ROM.
OSLANEC, Peter - ŠPANIELKA, Ján - PAVLÍK, Ľubomír - OSLANEC, Peter. Zvýšenie kvality odliatku hlavy valca na základe expertnej analýzy. Ed. F. Dorčáková, L. Čiripová. In Výskumné centrum progresívnych materiálov a technológií pre súčasné a budúce aplikácie "PROMATECH" : zborník z workshopu [elektronický zdroj]. - Košice : ÚMV SAV, 2015. ISBN 978-80-89782-01-7. Názov prebraný z pretlače na CD-ROM.
ŠVANTNER, Tomáš - BALOG, Martin - SIMANČÍK, František. Kompozitný materiál Al-AlN pre dlhodobé aplikácie pri zvýšených teplotách. Ed. F. Dorčáková, L. Čiripová. In Výskumné centrum progresívnych materiálov a technológií pre súčasné a budúce aplikácie "PROMATECH" : zborník z workshopu [elektronický zdroj]. - Košice : ÚMV SAV, 2015. ISBN 978-80-89782-01-7. Názov prebraný z pretlače na CD-ROM.
ŠPANIELKA, Ján - PAVLÍK, Ľubomír - TOBOLKA, Peter. Odľahčený držiak automobilového motora z hliníkovej peny. Ed. F. Dorčáková, L. Čiripová. In Výskumné centrum progresívnych materiálov a technológií pre súčasné a budúce aplikácie "PROMATECH" : zborník z workshopu [elektronický zdroj]. - Košice : ÚMV SAV, 2015. ISBN 978-80-89782-01-7. Názov prebraný z pretlače na CD-ROM.
JERZ, Jaroslav. Buď energia! In Quark : Magazín o vede a technike, 2015, roč. 21, č. 12, s. 7-11. ISSN 1335-4000.
ŠEBEK, Jozef. Projekt ENERGOZ : Výroba a spotreba energie z obnoviteľných zdrojov. In Green Business Revue : štvrťročník, pilotné vydanie. - Bratislava: 4MA.MEDIA, 2015, roč.1, č.1, s. 76-79.