Publications 2014


MÚČKA, Peter. Dynamické účinky vozidiel na vozovku. In Mechanika vozoviek pozemných komunikácií. - Žilina : EDIS, 2014, s. 81-94. ISBN 978-80-554-0934-4.

MOONEY, Robin P. - MCFADDEN, Shaun - GABALCOVÁ, Zuzana - LAPIN, Juraj. An experimental - numerical method for estimating heat transfer in a Bridgman furnace. In Applied Thermal Engineering, 2014, vol.67, pp.61 - 71. (2.624 - IF2013). (2014 - Current Contents). ISSN 1359-4311.

RANACHOWSKI, Z. - JÓŹWIAK-NIEDŹWIEDZKA, D. - RANACHOWSKI, Przemyslaw - REJMUND, F. - DĄBROWSKI, M. - KÚDELA, Stanislav, Jr. - DVORÁK, Tomáš. Application of X-ray microtomography and optical microscopy to determine the microstructure of concrete penetrated by carbon dioxide = Zastosowanie mikrotomografii komputerowej i mikroskopii optycznej do oceny mikrostruktury betonów poddanych działaniu CO2. In Archives of Metallurgy and Materials, 2014, vol. 59, no. 4, p. 1441-1447. (0.763 - IF2013). (2014 - Current Contents). ISSN 1733-3490. Dostupné na internete: .

BALOG, Martin - KRÍŽIK, Peter - NOSKO, Martin - HÁJOVSKÁ, Zuzana - CASTRO RIGLOS, Maria Victoria - RAJNER, Walter - LIU, De-Shin - SIMANČÍK, František. Forged HITEMAL: Al-based MMCs strengthened with nanometric thick Al2O3 skeleton. In Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 2014, vol. A 613, p. 82-90. (2.409 - IF2013). (2014 - Current Contents). ISSN 0921-5093.

KHODABAKHSHI, F. - SIMCHI, A. - KOKABI, A.H. - GERLICH, A.P. - NOSKO, Martin. Effects of post-annealing on the microstructure and mechanical properties of friction stir processed Al-Mg-TiO2 nanocomposites. In Materials and Design, 2014, vol. 63, p. 30-41. (3.171 - IF2013). (2014 - Current Contents). ISSN 0261-3069.

KHODABAKHSHI, Farzad - SIMCHI, Abdolreza - KOKABI, Amirhossein - NOSKO, Martin - ŠVEC, Peter. Strain rate sensitivity, work hardening, and fracture behavior of an Al-Mg TiO2 nanocomposite Prepared by friction stir processing. In Metallurgical and materials transactions A : physical metallurgy and materials science, 2014, vol. 45A, iss. 9, p. 4073-4088. (1.730 - IF2013). (2014 - Current Contents, WOS, SCOPUS). ISSN 1073-5623.

KRÍŽIK, Peter - BALOG, Martin - ILLEKOVÁ, Emília - ŠVEC, Peter - MAŤKO, Igor - ŠTĚPÁNEK, Matěj - NOSKO, Martin - SIMANČÍK, František. The oxidation behavior of gas-atomized Al and Al alloy powder green compacts during heating before hot extrusion and the seggested heating process. In Journal of Materials Processing Technology, 2014, vol.214, p.1165-1172. (2.041 - IF2013). (2014 - Current Contents). ISSN 0924-0136.

KHODABAKHSHI, F. - SIMCHI, A. - KOKABI, A.H. - NOSKO, Martin - SIMANČÍK, František - ŠVEC, Peter. Microstructure and texture development during friction stir processing of Al-Mg alloy sheets with TiO2 nanoparticles. In Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 2014, vol.605, no. 5, p.108-118. (2.409 - IF2013). (2014 - Current Contents). ISSN 0921-5093.

MIKULA, Marian - ROCH, T. - PLAŠIENKA, Dušan - SATRAPINSKYY, L. - ŠVEC, Peter - VLČKOVÁ, D. - DVORANOVÁ, M. - GRANČIČ, B. - GREGOR, M. - PLECENIK, A. - KÚŠ, P. Thermal stability and structural evolution of quaternary Ti-Ta-B-N coatings. In Surface and coatings technology, 2014, vol. 259, p. 698 - 706. (2.199 - IF2013). (2014 - Current Contents). ISSN 0257-8972.

GRANČIČ, B. - MIKULA, Marian - ROCH, T. - ZEMAN, Petr - SATRAPINSKYY, L. - GREGOR, M. - PLECENIK, T. - DOBROČKA, Edmund - HÁJOVSKÁ, Zuzana - MIČUŠÍK, Matej - ŠATKA, A. - ZAHORAN, M. - PLECENIK, Andrej - KÚŠ, P. Effect of Si addition on mechanical properties and high temperature oxidation resistance of Ti-B-Si hard coatings. In Surface and coatings technology, 2014, vol.240, p.48-54. (2.199 - IF2013). (2014 - Current Contents). ISSN 0257-8972.

KOVÁČIK, Jaroslav - BALOG, Martin - EMMER, Štefan. Electrical conductivity and hardness of Cu-graphite composite after ECAP. In Kovové materiály, 2014, roč.52, s.71-76. (0.546 - IF2013). (2014 - Current Contents, WOS, SCOPUS). ISSN 0023-432X.

KÚDELA, Stanislav, Jr. - IŽDINSKÝ, Karol - OSWALD, S. - RANACHOWSKI, P. - RANACHOWSKI, Z. - KÚDELA, Stanislav. Decomposition of silica binder during infiltration of Saffil fiber preform with Mg and Mg-Li melts. In Kovové materiály, 2014, roč. 52, č. 4, s. 183 - 188. (0.546 - IF2013). (2014 - Current Contents, WOS, SCOPUS). ISSN 0023-432X.

ČAVOJSKÝ, Miroslav - ŠVEC, Peter - JANIČKOVIČ, Dušan - OROVČÍK, Ľubomír - SIMANČÍK, František. Rapidly solidified Al-Mo and Al-Mn ribbons: microstructure and mechanical properties of extruded profiles. In Kovové materiály, 2014, roč. 52, č. 6, s. 371 - 376. (0.546 - IF2013). (2014 - Current Contents, WOS, SCOPUS). ISSN 0023-432X.

OPÁLEK, Andrej - ŠTEFÁNIK, Pavol - IŽDINSKÝ, Karol - KÚDELA, Stanislav, Jr. - ZEMÁNKOVÁ, Milina - ŠVEC, Peter Jr. The effect of atmosphere on reactions in Ni-Al green compacts subjected to thermal treatment in argon and air. In Kovové materiály, 2014, roč. 52, č. 5, s. 279 - 285. (0.546 - IF2013). (2014 - Current Contents, WOS, SCOPUS). ISSN 0023-432X.

ŠEBO, Pavol - ŠVEC, Peter - ZEMÁNKOVÁ, Milina - ŠVEC, Peter Jr. - JANIČKOVIČ, D. - ŠTEFÁNIK, Pavol. Joining of Mo and MoSi2 and their interaction with nickel. In Kovové materiály, 2014, roč. 52, č. 6, s. 321 - 327. (0.546 - IF2013). (2014 - Current Contents, WOS, SCOPUS). ISSN 0023-432X.

DARULA, R. - STEIN, George Juraj - SOROKIN, Sergey. Numerical simulations of electromagnet exposed to vibration. In Engineering Mechanics, 2013, vol. 20, no. 6, p. 439-448. ISSN 1802-1484.

VISKIĆ, Joško - SCHAUPERL, Zdravko - ĆATIĆ, Amir - BALOG, Martin - KRÍŽIK, Peter - GRŽETA, Biserka - POPOVIĆ, Jasminka - MILARDOVIĆ ORTOLAN, Sladana - MEHULIĆ, Ketij. Effects of wire EDM on the microstructure of P/M titanium samples = Utjecaj obrade erozimatom na mikrostrukturu površine titanija dobivenu metalurgijom praha. In Acta stomatologica croatica, 2014, vol. 48, no. 4, p. 245-330. ISSN 0001-7019. Názov prebraný z titulnej obrazovky. Dostupné na internete: .

EMMER, Štefan - MRKVOVÁ, Simona - KOVÁČIK, Jaroslav. Nástrojové materiály na trecie zváranie s premiešaním = Tool materials for friction stir welding. In Zváranie : odborný časopis so zameraním na zváranie a príbuzné technológie, 2014, roč. 63, č. 5-6, s. 126-129. ISSN 0044-5525.

DANNINGER, Herbert - ROUZBAHANI, F. - HAROLD, Ch. - PONEMAYR, H. - DAXELMÜLLER, M. - SIMANČÍK, František - IŽDINSKÝ, Karol. Powder metallurgy carbon free tool steel Fe-Co-Mo with varying Co and Mo contents. In Powder Metallurgy Progress : Journal of Science and Technology of Particle Materials, 2013, vol.13, no.2, pp.47-56. ISSN 1335-8978.

BESTERCI, Michal - SÜLLEIOVÁ, Katarína - BALLÓKOVÁ, Beáta - VELGOSOVÁ, Oksana - IVAN, Jozef. Failure mechanism of Cu-Al2O3 micro and nanomaterials observed by "in-situ tensile test in SEM". In Powder Metallurgy Progress : Journal of Science and Technology of Particle Materials, 2014, vol. 14, no. 4, p. 228-232. ISSN 1335-8978.

VELGOSOVÁ, Oksana - BESTERCI, Michal - IVAN, Jozef - SÜLLEIOVÁ, Katarína. Influence of technological factors on dispersion strengthened materials deformation mechanism studied by "in situ tensile test in SEM". In International Journal of Materials and Product Technology, 2014, vol. 49, no. 2/3, p. 129-159. (0.282 - IF2013). (2014 - WOS, SCOPUS). ISSN 0268-1900.

KOVÁČIK, Jaroslav - EMMER, Štefan. Steels as Materials for Sonotrode Tools. In Key Engineering Materials, 2014, vol. 601, p. 21-24. (2014 - SCOPUS). ISSN 1013-9826.

OPÁLEK, Andrej - IŽDINSKÝ, Karol - NAGY, Štefan - SIMANČÍK, František - ŠTEFÁNIK, Pavol - KÚDELA, Stanislav, Jr.. Microstructure and Properties of Composites Prepared by Reactive Pressure Infiltration of Aluminium into Metal and Ceramic Powder Preforms. In Materials Science Forum, 2014, vol.782, pp.523-526. (2014 - SCOPUS). ISSN 0255-5476.

KORÁB, Juraj - KAVECKÝ, Štefan - ŠTEFÁNIK, Pavol - IŽDINSKÝ, Karol - SIMANČÍK, František - DVORÁK, Tomáš. Microstructure and Thermal Expansion of Hybrid - Copper Alloy Composites Reinforced with Both Tungsten and Carbon Fibres. In Materials Science Forum, 2014, vol.782, pp.513-518. (2014 - SCOPUS). ISSN 0255-5476.

ŠTEFÁNIK, Pavol - IŽDINSKÝ, Karol - SIMANČÍK, František - BERONSKÁ, Naďa. Thermal Cycling of Copper Based Composite Reinforced with High Modulus Carbon Fibres. In Materials Science Forum, 2014, vol.782, pp.519-522. (2014 - SCOPUS). ISSN 0255-5476.

SENČEKOVÁ, Lucia - IŽDINSKÝ, Karol - SIMANČÍK, František - ŠTEFÁNIK, Pavol - ŠVEC, Pavol. The Effect of Ni Interlayers on Compactions of Mo/Mo Silicide Composites. In Materials Science Forum, 2014, vol.782, pp. 507-512. (2014 - SCOPUS). ISSN 0255-5476.

KOVÁČIK, Jaroslav - MARSAVINA, L. - ADAMČÍKOVÁ, Andrea - SIMANČÍK, František - FLOREK, Roman - NOSKO, Martin - TOBOLKA, Peter - MINÁR, Pavol - MINÁRIKOVÁ, Natália - JERZ, Jaroslav - LINUL, E. Uniaxial Compression Tests of Metallic Foams: A Recipe. In Key Engineering Materials, 2014, vol. 601, p.237-241. (2014 - SCOPUS). ISSN 1013-9826.

VOICONI, Tudor - LINUL, Emanoil - MARSAVINA, Liviu - KOVÁČIK, Jaroslav - KNEĆ, Marcin. Experimental determination of mechanical properties of aluminium foams using Digital Image Correlation. In Key Engineering Materials, 2014, vol. 601, p. 254-257. (2014 - SCOPUS). ISSN 1013-9826.

DVORÁK, Tomáš - ADAMČÍKOVÁ, Andrea. Non-destruction testing of condenser pipes using X-ray microtomography. In MATRIB 2014 : materials, tribology, recycling. - Zagreb : Hrvatsko društvo za materijale i tribologiju, 2014, s.85-92. ISSN 1848-5340.

KLIMOVÁ, Alena - LAPIN, Juraj. Microstructure Evolution During Annealing of Cast TiAl-Based Alloy. In METAL 2014 : International Conference on Metallurgy and Materials. - Ostrava : TANGER Ltd., 2014, s. 1145-1150. ISBN 978-80-87294-52-9.

NAGY, Štefan - NOSKO, Martin - DVORÁK, Tomáš - OROVČÍK, Ľubomír - IŽDINSKÝ, Karol - FLOREK, Roman. Microstructural study of particle reinforced composite prepared by master alloy dissolution. In MATRIB 2014 : materials, tribology, recycling. - Zagreb : Hrvatsko društvo za materijale i tribologiju, 2014, s.414-419. ISSN 1848-5340.

JERZ, Jaroslav - SIMANČÍK, František - OROVČÍK, Ľubomír - FLOREK, Roman. Energy efficiency with regard to recent breakthroughs in the field of materials science. In MATRIB 2014 : materials, tribology, recycling. - Zagreb : Hrvatsko društvo za materijale i tribologiju, 2014, s.189-196. ISSN 1848-5340.

OROVČÍK, Ľubomír - FLOREK, Roman - NOSKO, Martin - SIMANČÍK, František - JERZ, Jaroslav. The effect of heat treatment on the compression strength and deformation behavior of aluminium alloy foams. In MATRIB 2014 : materials, tribology, recycling. - Zagreb : Hrvatsko društvo za materijale i tribologiju, 2014, s.444-453. ISSN 1848-5340.

BALLÓKOVÁ, Beáta - BALOG, Martin - BESTERCI, Michal - SÜLLEIOVÁ, Katarína - HUANG, Song-Jeng. Microstructure, mechanical properties and fracture of Mg-Al2O3 nano composites. In ICCE-22 : 22nd annual international conference on composites/nano engineering. Saint Julian´s, Malta, 13.-19.7.2014. Ed. David Hui. - B.V., 2014.

ŠTĚPÁNEK, Matěj - BALOG, Martin - ČAVOJSKÝ, Miroslav - KRÍŽIK, Peter - SIMANČÍK, František. Hitemal composite material for pistons of internal combustion engine. In MATRIB 2014 : materials, tribology, recycling. - Zagreb : Hrvatsko društvo za materijale i tribologiju, 2014, s. 519-525. ISSN 1848-5340.

STEIN, George Juraj - TOBOLKA, Peter - CHMÚRNY, Rudolf. Preliminary investigations of a vibration attenuator based on eddy current principle. In MECHATRONIKA 2014 : Proceedings of the 16th International Conference on Mechatronics. - Brno : University of technology, 2014, p. 388 - 392. ISBN 978-80-214-4817-9. Názov prebraný z pretlače na CD-ROM.

BESTERCI, Michal - VELGOSOVÁ, Oksana - IVAN, Jozef - SÜLLEIOVÁ, Katarína. Failure mechanism of Cu-Al2O3 micro and nanomaterials observed by "in situ tensile test in SEM". In ICCE-22 : 22nd annual international conference on composites/nano engineering. Saint Julian´s, Malta, 13.-19.7.2014. Ed. David Hui. - B.V., 2014.

BALOG, Martin - SIMANČÍK, František - KRÍŽIK, Peter - NOSKO, Martin - RAJNER, Walter - WALCHER, M. - QIAN, M. Novel Ultrafine-Grained Aluminium Metal Matrix Composites Prepared from Fine Atomized Al Powders. In Light Metals 2014 : Proceedings of the symposia sponsored by the TMS Aluminum Committee an the TMS 2014 Annual Meeting & Exhibition. - New Jersey : Wiley, 2014, p. 1423-1430. ISBN 978-1-11888-908-4.

VOICONI, T. - MARSAVINA, L. - LINUL, E. - KOVÁČIK, Jaroslav. Determination of elastic and damping properties for closed-cell aluminium foams using impulse excitation technique. In Proceedings of 13th Youth Symposium on Experimental Solid Mechanics. - Prague : Czech Technical University in Prague, Faculty of Transportation Sciences, 2014, s. 141 - 144. ISBN 978-80-01-05556-4. Názov prebraný z titulnej obrazovky. Dostupné na internete: .

JERZ, Jaroslav - SIMANČÍK, František - OROVČÍK, Ľubomír. Advanced solution for energy storage in net zero-energy buildings. In Mechanical Technologies and Structural Materials 2014. - Split : Croatian Society for Mechanical Technologies, 2014, s. 47 - 54. ISSN 1847-7917.

BAKSA, P. - EMMER, Š. - KOVÁČIK, Jaroslav. Povrchovo modifikovaná Cu elektróda pre odporové bodové zváranie pozinkovaných plechov = Surface-modified Cu electrode for resistance spot welding of galvanized sheets. In Vrstvy a povlaky 2014 : Zborník prednášok. Rožnov pod Radhoštěm, 20. 10. - 21. 10. 2014. - Trenčín : Kníhviazačstvo s.r.o., 2014, s. 7-12. ISBN 978-80-970824-3-7.

EMMER, Š. - BAKSA, P. - KOVÁČIK, Jaroslav. Hodnotenie vlastností funkčných vrstiev TiB2, Ni-TiB2 a INC713LC-TiB2 pripravených elktroiskrovou depozíciou na substrát AW7075 = The evaluation of properties electro spark deposited functional layers TiB2, TiB2-Ni, INC713LC-TiB2 on substrate AW7075. In Vrstvy a povlaky 2014 : Zborník prednášok. Rožnov pod Radhoštěm, 20. 10. - 21. 10. 2014. - Trenčín : Kníhviazačstvo s.r.o., 2014, s. 49 - 54. ISBN 978-80-970824-3-7.

KLIMOVÁ, Alena - LAPIN, Juraj. Effect of oxygen on the microstructure of annealed TiAl-based alloy. In COMAT 2014 : 3rd International Conference. - Pilsen : TANGER Ltd., 2014. ISBN 978-80-87294-45-1. Názov prebraný z pretlače na CD-ROM.

LAPIN, Juraj - PELACHOVÁ, Tatiana. Influence of annealing on the microstructure of cast TiAl-based alloy : J. Lapin, T. Pelachová. In COMAT 2014 : 3rd International Conference. - Pilsen : TANGER Ltd., 2014. ISBN 978-80-87294-45-1. Názov prebraný z pretlače na CD-ROM.

KOVÁČIK, Jaroslav - EMMER, Štefan - RODRIGUEZ, Jose - CANADAS, Inmaculada. Solar Furnace: Thermal Shock Behaviour of TIB2 Coating on Steel. In METAL 2014 : International Conference on Metallurgy and Materials. - Ostrava : TANGER Ltd., 2014. ISBN 978-80-87294-52-9.

JERZ, Jaroslav. INNOVMAT - platform for knowledge transfer in the field of advanced engineering materials into industry. In Vom Innovationsimpuls zum Markteintritt : Theorie - Praxis - Methoden. - Wien : Facultas Verlags- und Buchhandels AG, 2014, s. 217 - 225. ISBN 978-3-7089-1255-4.

FLOREK, Roman - SIMANČÍK, František - HARNÚŠKOVÁ, Jana - OROVČÍK, Ľubomír - DVORÁK, Tomáš - NOSKO, Martin - TEKEL, T. Injection molded plastics with aluminium foam core. In Procedia materials science, 2014, vol. 4, p. 306-310. ISSN 2211-8128. Názov prebraný z titulnej obrazovky. Dostupné na internete: .

JANEK, Marián - VINCZE, A. - MATEJDES, Marián - ZACHER, Tomáš - DARMO, Juraj - KAVECKÝ, Štefan - ŠATKA, A. - HAŠKO, D. - DANIELIK, Vladimír - UHEREK, F. - MATUŠKA, J. Vhodnosť pBN na štúdium taveninových sústav v infračervenej a ďalekej infračervenej oblasti pomocou THz-TDS = Application of pBN for molten salts systems study in the infrared and far-infrared region using THz-TDS. In Interakcie tavenín s progresívnymi anorganickými materiálmi. 5. odborný seminár, Borinka, Slovensko, 20. - 21. október 2014 : zborník príspevkov. Editor Jana Valúchová. - Bratislava, 2014, p. 68-74. ISBN 978-80-971648-2-9.

LAPIN, Juraj. Trends and Direction in Materials Development. In METAL 2014 : International Conference on Metallurgy and Materials. - Ostrava : TANGER Ltd., 2014, s.33. ISBN 978-80-87294-52-9.

SIMANČÍK, František - BALOG, Martin - KRÍŽIK, Peter - FLOREK, Roman. How far can be properties of aluminium manipulated without alloying elements? In ISPMA 13 : 13th International Symposium on Physics of Materials. - Prague : Charles University in Prague, Department of Physics of Materials, 2014.

KOVÁČIK, Jaroslav - EMMER, Štefan - BIELEK, Jozef. Cu/graphite composite material: cross properties : abstrakt. In MICROMECH 2014 : advances in micromechanics of materials. - Rzeszów : Oficyna Wydawnicza Politechniki Rzeszsowskiej, 2014, s.27. ISBN 978-83-7199-942-9.

LAPIN, Juraj - DEMIAN, Svetozár - ČIČMAN, Ján. Precision Cast TiAl Turbocharger Wheels. In METAL 2014 : International Conference on Metallurgy and Materials. - Ostrava : TANGER Ltd., 2014, s.87. ISBN 978-80-87294-52-9.

RANACHOWSKI, Z. - JÓŹWIAK-NIEDŹWIEDZKA, D. - RANACHOWSKI, P. - PAWEŁEK, A. - KÚDELA, Stanislav, Jr. - DVORÁK, Tomáš. The analysis of pore distribution and pore connectivity in concrete samples using X-ray microtomography. In 39th Solid Mechanics Conference - Book of Abstracts. - Warszawa : Institute of Fundamental Technological Research PAN, 2014, s. 199. ISBN 978-83-89687-89-0. Názov prebraný z pretlače na CD-ROM.

LAPIN, Juraj - GABALCOVÁ, Zuzana - BAJANA, Otto - PELACHOVÁ, Tatiana - STANEKOVÁ, Hana - FRKÁŇOVÁ, Katarína. Microstructure and properties of cast Ti-46Al-8Ta alloy. In TMS 2014 : 143rd Annual Meeting and Exhibition.

ŠIŠKOVÁ, Alena - ECKSTEIN ANDICSOVÁ, Anita - OPÁLEK, Andrej - RYCHTER, Piotr. Fibrous materials prepared by electrospinning for controlled release systems used in agriculture. In Agricultural applications of Electrospinning & Electrospinning of Agricultural Products : COST MP1206 Workshop, Vienna, Austria, 6.10. - 7.10. 2014 : agenda & abstract collestion. - Vienn, Austria : CEST Kompetenzzentrum fur Electrochemische Oberflachentechnologie, 2014, p. 1.

ŠIŠKOVÁ, Alena - ECKSTEIN ANDICSOVÁ, Anita - OROVČÍK, Ľubomír - RYCHTER, Piotr. Modification of films and electrospun mats for control release systems used in agriculture. In BiPoCo 2014 : 2nd International Conference on Bio-based Polymers and Composites : Visegrád, Hungary, August 24-28, 2014 : proceedings. - Budapest, Hungary : Budapest University of Technology and Economics, 2014, non p.

ŠIŠKOVÁ, Alena - OPÁLEK, Andrej - ECKSTEIN ANDICSOVÁ, Anita. Controlled release system based on the silk carriers produced by electrospinning. In Nice 2014 : 2nd International Conference Bioinspired and Biobased Chemistry & Materials : program & abstracts. - Nice, France : IUPAC, 2014, p65.

ŠIŠKOVÁ, Alena - MACOVÁ, Eva - OPÁLEK, Andrej - RYCHTER, Piotr - ECKSTEIN ANDICSOVÁ, Anita. Preparation of functional materials from well characterized biodegradable co-polyesters for application in agriculture. In Nice 2014 : 2nd International Conference Bioinspired and Biobased Chemistry & Materials : program & abstracts. - Nice, France : IUPAC, 2014, p66.

ŠIŠKOVÁ, Alena - ECKSTEIN ANDICSOVÁ, Anita - OPÁLEK, Andrej - RYCHTER, Piotr. Functional materials from renewable sources produced by electrospinning technique. In Chemia - nadzieje i marzenia : 57 Zjazd naukowy polskiego towarzystwa chemicznego i stowarzyszenia inzynierow i technikow przemyslu chemicznego : materialy zjazdowe streszczenia. - Lodz, Poland : Universytet Lodzki, 2014, s02-P40.

VISKIC, J. - MILARDOVIC ORTOLAN, S. - KRÍŽIK, Peter - BALOG, Martin - SCHAUPERL, Z. - CATIC, A. - MEHULIC, K. Application of P/M titanium in substructure manufacturing for metal-ceramic systems. In Journal of dental research : abstracts, 2014, vol. 93, special issue C. ISSN 1544-0591. Názov prebraný z titulnej obrazovky. Dostupné na internete: .

LINUL, Emanoil - VOICONI, Tudor - MARSAVINA, Liviu - KOVÁČIK, Jaroslav. Experimental characterization of aluminum foams under dynamic compressive loading by means of energy-absorption and efficiency diagrams : abstrakt. In METAL 2014 : International Conference on Metallurgy and Materials. - Ostrava : TANGER Ltd., 2014. ISBN 978-80-87294-52-9.

ŠIŠKOVÁ, Alena - ECKSTEIN ANDICSOVÁ, Anita - OPÁLEK, Andrej. Targeted modification of films and electrospun fiber mats for control release systems used in agriculture. In BYPOS : 5th Bratislava Young Polymer Scientists Workshop : Zázrivá, Slovakia, June 16th - 20th, 2014 : workshop book. - Bratislava : Young Scientists Council of Polymer Institute of the Slovak Academy of Sciences, 2014, p. 65. ISBN 978-80-970923-5-1.

KAVECKÝ, Štefan - IŽDINSKÝ, Karol - ŠTEFÁNIK, Pavol - NAGY, Štefan. Erosion study of Al2O3 preform/Cu matrix composite. In Deformation and fracture in PM materials DFPM 2014 : International conference. Book of abstracts. Stará Lesná, 26.-29.10.2014. - Košice : Institute of Materials Research SAS, 2014, p. 55. ISBN 978-80-970964-8-9.

ŠTEFÁNIK, Pavol - OPÁLEK, Andrej - IŽDINSKÝ, Karol - ŠVEC, Peter Jr. Pressureless reaction synthesis of Ni+Al powder mixture in oxide atmosphere. In Deformation and fracture in PM materials DFPM 2014 : International conference. Book of abstracts. Stará Lesná, 26.-29.10.2014. - Košice : Institute of Materials Research SAS, 2014, p. 56. ISBN 978-80-970964-8-9.

BESTERCI, Michal - SÜLLEIOVÁ, Katarína - BALLÓKOVÁ, Beáta - VELGOSOVÁ, Oksana - IVAN, Jozef. Failure mechanism of Cu-Al2O3 micro and nanomaterials observed by "in situ tensile test in SEM". In Deformation and fracture in PM materials DFPM 2014 : International conference. Book of abstracts. Stará Lesná, 26.-29.10.2014. - Košice : Institute of Materials Research SAS, 2014, p. 52. ISBN 978-80-970964-8-9.

LAPIN, Juraj - KLIMOVÁ, Alena - GABALCOVÁ, Zuzana. Materials Research Space. In Space Research in Slovakia 2012-2013. Eds.Karel Kudela and Ján Feranec. - Košice : Institute of Experimental Physics SAS, 2014, s.40-49. ISBN 978-80-89656-07-3.

NAGY, Štefan - NOSKO, Martin - IŽDINSKÝ, Karol. Štúdium štruktúry Al predzliatiny s vysokou koncentráciou keramických častíc vyrobené tlakovou infiltráciou. In SEMDOK 2014 : odborný seminár. - Žilina : University of Žilina, 2014.

ŠTĚPÁNEK, Matěj - BALOG, Martin - KRÍŽIK, Peter - SIMANČÍK, František. Piesty pre spaľovacie motory z kompozitného materiálu Hitemal. In SEMDOK 2014 : odborný seminár. - Žilina : University of Žilina, 2014.