Publications 2012


JERZ, Jaroslav. An overview of Slovak institutions engaged with materials science and engineering. In Innovation Process in ICSTI Community : Issues of modern applied materials science. - ICSTI, 2012.

LOFAJ, František - MIKULA, Marian - GRANČIČ, B. - CEMPURA, Gregorz - HORŇÁK, Peter - KÚŠ, P. - KOTTFER, Daniel. Tribological properties of TiBx and WC/C coatings. In Ceramics-Silikáty, 2011, vol. 55, no. 4, p. 305-311. (0.297 - IF2010). (2011 - Current Contents, SCOPUS, WOS). ISSN 0862-5468.

MÚČKA, Peter - GRANLUND, J. Is the Road Quality Still Better? In Journal of Transportation Engineering, 2012, vol.138, no.12, p.1520-1529. (0.620 - IF2011). (2012 - Current Contents, WOS). ISSN 0733-947X.

MÚČKA, Peter - GRANLUND, Johan. Comparison of longitudinal unevenness of old and repaired highway lanes. In Journal of Transportation Engineering ASCE, 2012, vol.138, no.3, p.371-380. (0.620 - IF2011). (2012 - Current Contents, SCOPUS, WOS). ISSN 0733-947X.

MÚČKA, Peter. Longitudinal road profile spectrum approximation by split straight lines. In Journal of Transportation Engineering, 2012, vol. 138, no. 2, p. 243-251. (0.620 - IF2011). (2012 - Current Contents, WOS). ISSN 0733-947X.

MÚČKA, Peter. Relationship between International Roughness Index and Straightedge Index. In Journal of Transportation Engineering, 2012, vol.138, iss.9, p.1099-1112. (0.620 - IF2011). (2012 - Current Contents, WOS). ISSN 0733-947X.

KVETKOVÁ, Lenka - DORČÁKOVÁ, Františka - NOSKO, Martin - DUSZA, Ján - KUN, Péter - BALÁZSI, Csaba. Indentation toughness of Si3N4 reinforced with graphene platelets. In Chemické listy, 2012, vol. 106, p. s407-s408. (0.529 - IF2011). (2012 - Current Contents, WOS, CCC, SCOPUS). ISSN 0009-2770. (Local mechanical properties 2011 : international conference).

DUSZA, Ján - MORGIEL, Jerzy - DUSZOVÁ, Annamária - KVETKOVÁ, Lenka - NOSKO, Martin - KUN, Péter - BALÁZSI, Csaba. Microstructure and fracture toughness of Si3N4+graphene platelet composites. In Journal of the European Ceramic Society, 2012, vol. 32, p. 3389-3397. (2.353 - IF2011). (2012 - Current Contents, WOS, SCOPUS). ISSN 0955-2219.

LAPIN, Juraj - STANEKOVÁ, Hana. Creep Deformation of Intermetallic TiAl-Based Alloy. In Acta Physica Polonica A, 2012, vol.122, no.3, p.453-456. (0.444 - IF2011). (2012 - Current Contents, WOS, SCOPUS). ISSN 1898-794X.

STANEKOVÁ, Hana - LAPIN, Juraj - PELACHOVÁ, Tatiana. Controlling Mechanisms of Creep Deformation of New Air-Hardenable TiAl-Based Alloy. In Acta Physica Polonica A, 2012, vol.122, no.3, p.504-507. (0.444 - IF2011). (2012 - Current Contents, WOS, SCOPUS). ISSN 1898-794X.

ČAVOJSKÝ, Miroslav - BALOG, Martin - DVOŘÁK, Jiří - ILLEKOVÁ, Emília - ŠVEC, Peter - KRÍŽIK, Peter - JANIČKOVIČ, Dušan - SIMANČÍK, František. Microstructure and properties of extruded rapidly solidified AlCr4.7Fe1.1Si0.3 (at.%) alloys. In Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 2012, vol.549, p.233-241. (2.003 - IF2011). (2012 - Current Contents, SCOPUS, WOS). ISSN 0921-5093.

VIERKE, Jens - SCHUMACHER, Gerhard - BALOG, Martin - NAGY, Juraj - SIMANČÍK, František - WOLLGARTEN, Markus - BANHART, John. Plastic deformation of Al85Ni10La5 by equal channel angular pressing. In Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 2012, vol.A 558, p.64-69. (2.003 - IF2011). (2012 - Current Contents, SCOPUS, WOS). ISSN 0921-5093.

LAPIN, Juraj - PELACHOVÁ, Tatiana - GEBURA, Marek. The effect of creep exposure on microstructure stability and tensile properties of single crystal nickel based superalloy CMSX-4. In Kovové materiály, 2012, roč. 50, č.6, s.379-386. (0.451 - IF2011). (2012 - Current Contents, SCOPUS, WOS). ISSN 0023-432X.

SENČEKOVÁ, Lucia - IŽDINSKÝ, Karol - SIMANČÍK, František - MINÁR, Pavol - NOSKO, Martin - ŠVEC, P. The effect of Nb interlayers on compaction of Mo/Mo silicide composites. In Kovové materiály, 2012, roč. 50, s.425-432. (0.451 - IF2011). (2012 - Current Contents, SCOPUS, WOS). ISSN 0023-432X.

PIECZYSKA, E.A. - TOBUSHI, H. - TAKEDA, Kazuya - STRÓZ, D. - RANACHOWSKI, Z. - KULASIŃSKI, K. - KÚDELA, Stanislav, Jr. - LUCKNER, J. Martensite transformation bands studied in TiNi shape memory alloy by infrared and acoustic emission techniques. In Kovové materiály, 2012, roč. 50, p.309-318. (0.451 - IF2011). (2012 - Current Contents, SCOPUS, WOS). ISSN 0023-432X.

NOSKO, Martin - SIMANČÍK, František - FLOREK, Roman - JERZ, Jaroslav - MÚČKA, Peter - OSLANEC, Peter. Effect of Heating Conditions on the Structural Uniformity and Collapse Stress Variability of Aluminium Foam. In Strojarstvo : časopis za teoriju i praksu u strojarstvu, 2011, vol. 53, no. 4, p. 301-305. (0.222 - IF2010). ISSN 0562-1887.

KOVÁČIK, Jaroslav - EMMER, Štefan. Correlation between Shear Wave Velocity and Porosity in Porous Solids and Rocks. In Journal of Powder Technology, 2012, vol.2013, 3 pages. ISSN 2090-7737 (online).

STEIN, George Juraj - DARULA, R. - CHMÚRNY, Rudolf. The limits of the beam sag under influence of static magnetic and electric force. In Engineering Mechanics, 2011, vol. 18, no. 5/6, p. 323-329.

IŽDINSKÁ, Zita - BRUSILOVÁ, Alena - IŽDINSKÝ, Karol. A Study on the Abrasive Resistance of Ni Based Laser Coatings with WC Hard Phase. In Scientific Proceedings, 2011, vol.19, pp.51-56. ISSN 1338-1954.

EMMER, Štefan - KOVÁČIK, Jaroslav. The wear of particulate Cu-graphite composite system. In Scientific Proceedings, 2011, vol.19, p.126-133. ISSN 1338-1954.

ŠTEFÁNIK, Pavol - KAVECKÝ, Štefan - IŽDINSKÝ, Karol. Deposition of nickel on carbon fibres by galvanic methods. In Materiálové inžinierstvo, 2012, vol.19, no.1, p.29-33. ISSN 1335-0803.

BALOG, Martin - FLOREK, Roman - NOSKO, Martin - SIMANČÍK, František. Self-propagating synthesis of Ti-Al-C powder mixtures. In Key Engineering Materials, 2012, vol.520, p.347-352. (2012 - SCOPUS). ISSN 1013-9826.

RANACHOWSKI, Przemyslaw - REJMUND, Feliks - RANACHOWSKI, Zbigniew - PAWELEK, Andrzej - PIATKOWSKI, Andrzej - KÚDELA, Stanislav, Jr.. Rola fazy mulitowej w podwyzszeniu odporności elektroporcelan na procesy starzeniowe. In Przeklad elektrotechniczny, 2012, vol.88, nr.11, p.162-165. (2012 - SCOPUS, WOS). ISSN 0033-2097.

BESTERCI, Michal - VELGOSOVÁ, Oksana - IVAN, Jozef - KVAČKAJ, Tibor - KULU, Priit. Fracture mechanism of dispersion-strengthened Cu-Al2O3 nanosystem. In Acta Metallurgica Slovaca, 2012, vol. 18, no. 2-3, p. 76-81. (2012 - SCOPUS). ISSN 1338-1156.

FRKÁŇOVÁ, Katarína - LAPIN, Juraj. Relationship between microstructure and cooling rate in air-hardenable TiAl-based alloy. In METAL 2012 : international conference on metallurgy and materials. - Brno, 2012, p. 1227-1233. (2012 - WOS). ISBN 978-80-87294-29-1.

KLIMOVÁ, Alena - LAPIN, Juraj. Microsegregation behaviour of the alloying elements in directionally solidified intermetallic Ti-44Al-5Nb-0.2B-0.2C alloy. In METAL 2012 : international conference on metallurgy and materials. - Brno, 2012, s. 1498-1503. (2012 - WOS). ISBN 978-80-87294-29-1.

DVORÁK, Tomáš - NOSKO, Martin - ČAVOJSKÝ, Miroslav. Possibilities of X-ray microtomography for non-destructive testing of materials. In MATRIB 2012 : international conference. - Zagreb : Hrvatsko društvo za materijale i tribologiju, 2012, s.72 - 77. ISBN 978-953-7040-22-2.

JERZ, Jaroslav - KOŠÚT, Ján - OROVČÍK, Ľubomír. INNOVMAT - knowledge transfer platform in the field of engineering materials. In MATRIB 2012 : international conference. - Zagreb : Hrvatsko društvo za materijale i tribologiju, 2012, s.108-114. ISBN 978-953-7040-22-2.

OROVČÍK, Ľubomír - JERZ, Jaroslav - FLOREK, Roman - KOVÁČIK, Jaroslav. Innovations of industrial products by knowledge transfer in the field of aluminium foam. In MATRIB 2012 : international conference. - Zagreb : Hrvatsko društvo za materijale i tribologiju, 2012, s.260 - 266. ISBN 978-953-7040-22-2.

LAPIN, Juraj - PELACHOVÁ, Tatiana - GEBURA, Marek. Microstructure degradation of nickel based single crystal superalloy during creep. In METAL 2012 : international conference on metallurgy and materials. - Brno, 2012, s. 1257-1263. (2012 - WOS). ISBN 978-80-87294-29-1.

STANEKOVÁ, Hana - LAPIN, Juraj. Creep damage assessment in intermetallic Ti-46Al-8Ta alloy using high-resolution computed tomography. In METAL 2012 : international conference on metallurgy and materials. - Brno, 2012, s. 1245-1251. (2012 - WOS). ISBN 978-80-87294-29-1.

STEIN, George Juraj - DARULA, R. - SOROKIN, Sergey. Use of electro-magnetic damping for vibration control. In ENGINEERING MECHANICS 2012. - Prague : Institute of Theoretical and Applied Mechanics Academy of Sciences CR, 2012, s.1219-1228. ISBN 978-80-86246-40-6.

DARULA, R. - STEIN, George Juraj - KALLESOE, Carsten Skovmose - SOROKIN, Sergey. Mathematical Modelling and Parameter Identification of an Electro-Magneto-Mechanical Actuator for Vibration Control. In Proceedings of the ASME 2012 : 11th Biennial Conference on Engineering Systems Design and Analysis. Vol.2. - Nantes, 2012, p. 291-299. ISBN 978-0-7918-4485-4.

STEIN, George Juraj - DARULA, R. - SOROKIN, S. Control of forced vibrations of mechanical structures by an electromagnetic controller with a permanent magnet. In Proceedings International Conference on Noise and Vibration Engineering. - Leuven : Department Werktuigkunde, 2012, s.385-393. (2012 - WOS). ISBN 9789073802896.

JERZ, Jaroslav - OROVČÍK, Ľubomír - WILFINGER, Barbara - HULA, Robert Christian. Effective knowledge transfer of advanced technologies for production on innovative engineering materials into industry. In INTED 2012 : 6th international technology, education and development conference. - Valencia : IATED, 2012, s.0737-0745. ISBN 978-84-615-5563-5.

HARNÚŠKOVÁ, Jana - SIMANČÍK, František - FLOREK, Roman - NOSKO, Martin - GARCIA-MORENO, F. Foaming of aluminium combining casting and foamable precursors. In Cellular Materials : CELLMAT 2012. - Dresden : DGM, 2012. ISBN 978-3-00-039965-7.

NOSKO, Martin - KOVÁČIK, Jaroslav - SIMANČÍK, František - TOBOLKA, Peter - DARULA, R. - FLOREK, Roman. Sound absorption ability of aluminium foams. In Cellular Materials : CELLMAT 2012. - Dresden : DGM, 2012. ISBN 978-3-00-039965-7.

KLIMOVÁ, Alena - LAPIN, Juraj. On distribution of alloying elements during solidification of peritectic TiAl based alloy. In International Doctoral Seminar : Proceedings. - Trnava : AlumniPress, 2012, s.201-209. ISBN 978-80-8096-164-0.

FRKÁŇOVÁ, Katarína - LAPIN, Juraj. Microstructure evolution of Ti-46Al-8Ta alloy during jominy end quench test. In SEMDOK 2012 : 17th international of PhD.student`s seminar. - Žilina : University of Žilina, 2012, s.22-25. ISBN 978-80-554-0477-6.

KLIMOVÁ, Alena - LAPIN, Juraj. Microstructure evolution and microsegregation in intermetallic Ti-44Al-5Nb-0.2B-0.2C alloy during directional solidification. In SEMDOK 2012 : 17th international of PhD.student`s seminar. - Žilina : University of Žilina, 2012, s.33-36. ISBN 978-80-554-0477-6.

STANEKOVÁ, Hana - LAPIN, Juraj. Creep fracture of intermetallic Ti-46Al-8Ta alloy. In SEMDOK 2012 : 17th international of PhD.student`s seminar. - Žilina : University of Žilina, 2012, s.69-72. ISBN 978-80-554-0477-6.

HARNÚŠKOVÁ, Jana. Foams of heat treatable aluminium alloys. In 20.Jubilejna konferenca o materialih in tehnologijah : program i knjiga povzetkov. - Ljubljana : Inštitut za kovinske materiale in tehnologije, 2012, s.64.

LAPIN, Juraj - FRKÁŇOVÁ, Katarína. Effect of heat treatments and high temperature exposure on microstructure and mechanical properties of intermetallic Ti-46Al-8Ta alloy : abstrakt. In The 15th Israel Materials Engineering Conference, 2012.

OROVČÍK, Ľubomír - JERZ, Jaroslav - NOSKO, Martin - FLOREK, Roman - BELICA, Eugen. Interfaces and interactions of aluminium MMC with an aluminium alloy melt. In 20.Jubilejna konferenca o materialih in tehnologijah : program i knjiga povzetkov. - Ljubljana : Inštitut za kovinske materiale in tehnologije, 2012, s.192.

PAWELEK, Andrzej - KÚDELA, Stanislav - RANACHOWSKI, Z. - PIATKOWSKI, Andrzej - KÚDELA, Stanislav, Jr. - RANACHOWSKI, Przemyslaw. Microcracking of ceramic and carbon fibres and acoustic emission in channel-die compressed Mg-Li and Mg-Al alloys matrix composites. In Crack Paths (CP 2012) : proceedings of the 4th international conference. - Gaeta : University of Cassino, 2012.

MIKULA, Marian - GRANČIČ, B. - SATRAPINSKYY, L. - ROCH, T. - GREGOR, M. - PLECENIK, T. - ČIČKA, R. - PLECENIK, Andrej - KÚŠ, P. Nanostructured CrAlYN and CrSiN coatings for environmental protection of γ-TiAll based alloys at elevated temperatures. In 14th Joint Vacuum Conference. 12th European Vacuum Conference. 11th Annual Meeting of the German Vacuum Society. 19th Croatian - Slovenium Vacuum Meeting : Programme and Book of Abstracts. - Zagreb : Croatian Academy of Sciences, 2012, s.131. ISBN 978-953-98154-1-5.

GRANČIČ, B. - MIKULA, Marian - ROCH, T. - SATRAPINSKYY, L. - GREGOR, M. - PLECENIK, T. - ČIČKA, R. - PLECENIK, Andrej - KÚŠ, P. Nanostructured Ti-B-Cr-Si-N coatings with improved oxidation resistance at elevated temperatures prepared using magnetron sputtering. In 14th Joint Vacuum Conference. 12th European Vacuum Conference. 11th Annual Meeting of the German Vacuum Society. 19th Croatian - Slovenium Vacuum Meeting : Programme and Book of Abstracts. - Zagreb : Croatian Academy of Sciences, 2012, s.132. ISBN 978-953-98154-1-5.

FLOREK, Roman - SIMANČÍK, František - GLEICH, A. - NOSKO, Martin - HARNÚŠKOVÁ, Jana. Impact absorber of aluminium foam for railway carriages. In 20.Jubilejna konferenca o materialih in tehnologijah : program i knjiga povzetkov. - Ljubljana : Inštitut za kovinske materiale in tehnologije, 2012, s.164.

NOSKO, Martin - SIMANČÍK, František - FLOREK, Roman. Fatigue behavior of aluminium foam. In 20.Jubilejna konferenca o materialih in tehnologijah : program i knjiga povzetkov. - Ljubljana : Inštitut za kovinske materiale in tehnologije, 2012, s.191.

FRKÁŇOVÁ, Katarína - LAPIN, Juraj - TARABA, Bohumil. Effect of Cooling Rate on Microstructure of Intermetallic Ti-46Al-8Ta Alloy During Jominy end Quench Test : abstrakt. In The 15th Israel Materials Engineering Conference, 2012.

IŽDINSKÝ, Karol. The role of microscopy in development of metal matrix composite materials. In Mikroskopie 2012. - Praha : Československá mikroskopická společnost, 2012, s.21.

ŠTEFÁNIK, Pavol - IŽDINSKÝ, Karol - KAVECKÝ, Štefan - OPÁLEK, Andrej. Microstructure and thermal conductivity of Cu-Cr alloys and composite reinforced with short high modulus carbon fibres. In BALLÓKOVÁ, Beáta - HVIZDOŠ, Pavol. FRAKTOGRAFIA 2012 : Book of Abstracts. - Košice : Institute of Materials Research SAS, 2012. ISBN 978-80-970964-2-7.

KAVECKÝ, Štefan - HNATKO, Miroslav - JANEK, Marián - ŠTEFÁNIK, Pavol. Carbon nanotubes and short high modulus carbon fibres combination to composite preparation. In BALLÓKOVÁ, Beáta - HVIZDOŠ, Pavol. FRAKTOGRAFIA 2012 : Book of Abstracts. - Košice : Institute of Materials Research SAS, 2012. ISBN 978-80-970964-2-7.

OPÁLEK, Andrej - KÚDELA, Stanislav, Jr. - NOSKO, Martin - IŽDINSKÝ, Karol - ŠTEFÁNIK, Pavol. Forming of intermetallic phases during infiltration of nickel rods and nickel powder with molten aluminium. In BALLÓKOVÁ, Beáta - HVIZDOŠ, Pavol. FRAKTOGRAFIA 2012 : Book of Abstracts. - Košice : Institute of Materials Research SAS, 2012. ISBN 978-80-970964-2-7.

MIKULA, Marian - GRANČIČ, B. - SATRAPINSKYY, L. - ROCH, T. - GREGOR, M. - PLECENIK, T. - ČIČKA, R. - PLECENIK, Andrej - KÚŠ, P. High-temperature oxidation of nanostructured CrAlYN and CrSiN coatings in air. In PRO-TECH-MA 2012 : Progressive technologies and materials in mechanical engineering. - Košice : Technical University of Košice, 2012, s.473. ISBN 978-80-553-0950-7.

GRANČIČ, B. - MIKULA, Marian - ROCH, T. - SATRAPINSKYY, L. - GREGOR, M. - PLECENIK, T. - ČIČKA, R. - PLECENIK, Andrej - KÚŠ, P. Oxidation behaviour of PVD Ti-B-N coatings alloyed with Cr and Si at elevated temperatures. In PRO-TECH-MA 2012 : Progressive technologies and materials in mechanical engineering. - Košice : Technical University of Košice, 2012. ISBN 978-80-553-0950-7.

LAPIN, Juraj - GABALCOVÁ, Zuzana. Materials Research in Space. In Space Research in Slovakia 2010-2011 : COSPAR, Slovak National Committee. Editors Karel Kudela, Ján Feranec. - Košice : Slovak Academy of Sciences, 2012, s.35-42. ISBN 978-80-970779-5-2.