LAPIN, Juraj - GABALCOVÁ, Zuzana. Solidification behaviour of TiAl-based alloys studied by directional solidification technique. In Intermetallics, 2011, vol.19, pp.797-804. (2.335 - IF2010). (2011 - Current Contents, WOS, SCOPUS). ISSN 0966-9795.
KROPÁČ, Oldřich - MÚČKA, Peter. Specification of Obstacles in the Longitudinal Road Profile by Median Filtering. In Journal of Transportation Engineering ASCE, 2011, vol.137, no. 3, p.214-226. (0.460 - IF2010). (2011 - Current Contents). ISSN 0733-947X.
MÚČKA, Peter - KROPÁČ, Oldřich. Simulation of Obstacles in a Longitudinal Road Profile Based on the Weibull Distribution. In Journal of Testing and Evaluation, 2011, vol.39, no.3, p.335-345. (0.409 - IF2010). (2011 - Current Contents). ISSN 0090-3973.
KROPÁČ, Oldřich - MÚČKA, Peter. Shapes of obstacles in the longitudinal road profile. In Shock and Vibration, 2011, vol.18, no.5, p.671-682. (0.260 - IF2010). (2011 - Current Contents). ISSN 1070-9622.
KOVÁČ, Pavol - HUŠEK, Imrich - PACHLA, W. - KULCZYK, M. - MELIŠEK, Tibor - DVORÁK, Tomáš. As-deformed filament's density and transport currents of MgB2/Ti/Glidcop wire. In Journal of Alloys and Compounds, 2011, vol. 509, p. 8783-8787. (2.138 - IF2010). (2011 - Current Contents). ISSN 0925-8388.
LAPIN, Juraj - PELACHOVÁ, Tatiana - DOMÁNKOVÁ, Mária. Creep behaviour of a new air-hardenable intermetallic Ti-46Al-8Ta alloy. In Intermetallics, 2011, vol.19, pp.814-819. (2.335 - IF2010). (2011 - Current Contents, WOS, SCOPUS). ISSN 0966-9795.
STEIN, George Juraj - MÚČKA, Peter. Study of simultaneous shock and vibration control by a fore-and-aft suspension system of a driver´s seat. In International Journal of Industrial Ergonomics, 2011, vol. 41, p.520-529. (1.322 - IF2010). (2011 - Current Contents). ISSN 0169-8141.
KOLENÁK, Roman - CHACHULA, Michal - ŠEBO, Pavol - KOLENÁKOVÁ, Monika. Wettability and shear strength of active Sn2Ti solder on Al2O3 ceramics. In Soldering & Surface Mount Technology, 2011, vol.23, no.4, p.224-228. (0.636 - IF2010). (2011 - Current Contents). ISSN 0954-0911.
NOSKO, Martin - SIMANČÍK, František - IŽDINSKÝ, Karol - ŠVEC, Peter - FLOREK, Roman. Stabilizing intermetallic phases within aluminum foam. In Materials Letters, 2011, vol.65, p.1378-1380. (2.117 - IF2010). (2011 - Current Contents). ISSN 0167-577X.
ŠEBO, Pavol - ŠVEC, Peter - JANIČKOVIČ, Dušan - ILLEKOVÁ, Emília - PLEVACHUK, Yu. Interface between Sn-Sb-Cu solder and copper substrate. In Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 2011, vol. 528, p. 5955-5960. (2.101 - IF2010). (2011 - Current Contents). ISSN 0921-5093.
ILLEKOVÁ, Emília - HARNÚŠKOVÁ, Jana - FLOREK, Roman - SIMANČÍK, František - MAŤKO, Igor - ŠVEC, Peter. Peculiarities of TiH2 decomposition. In Journal of Thermal Analysis and Calorimetry, 2011, vol. 105, p. 583-590. (1.752 - IF2010). (2011 - Current Contents). ISSN 1388-6150.
BALOG, Martin - SIMANČÍK, František - WALCHER, Martin - RAJNER, Walter - POLETTI, Cecilia. Extruded Al-Al2O3 composites formed in situ during consolidation of ultrafine Al powders: Effect of the powder surface area. In Materials Science and Engineering A - Structural Materials Properties Microstructure and Processing, 2011, vol.529, p.131-137. (2.101 - IF2010). (2011 - Current Contents). ISSN 0921-5093.
BALOG, Martin - POLETTI, Cecilia - SIMANČÍK, František - WALCHER, Martin - RAJNER, Walter. The effect of native Al2O3 skin disruption on properties of fine Al powder compacts. In Journal of Alloys and Compounds, 2011, vol. 509S, june, p. S235-S238. (2.138 - IF2010). (2011 - Current Contents). ISSN 0925-8388.
YU, Peng - BALOG, Martin - YAN, M. - SCHAFFER, G.B. - QIAN, M. In situ fabrication and mechanical properties of Al-AIN composite by hot extrusion of partially nitrided AA6061 powder. In Journal of Materials Research, 2011, vol.26, no.14, pp. 1719-1725. (1.402 - IF2010). (2011 - Current Contents). ISSN 0884-2914.
MIKULA, Marian - GRANČIČ, B. - ROCH, T. - PLECENIK, T. - VÁVRA, Ivo - DOBROČKA, Edmund - ŠATKA, A. - BURŠÍKOVÁ, Vilma - DRŽÍK, Milan - ZAHORAN, M. - PLECENIK, Andrej - KÚŠ, P. The influence of low-energy ion bombardment on the microstructure development and mechanical properties of TiBx coatings. In Vacuum, 2011, vol.85, no.9, p.866-870. (1.048 - IF2010). (2011 - Current Contents). ISSN 0042-207X.
HAIDRY, Azhar Ali - SCHLOSSER, Peter - DURINA, Pavol - MIKULA, Marian - TOMÁŠEK, Milan - PLECENÍK, T. - ROCH, T. - PIDÍK, Andrej - ŠTEFEČKA, M. - NOSKOVIČ, Jaroslav - ZÁHORAN, Miroslav - KUS, Peter - PLECENÍK, Andrej. Hydrogen gas sensors based on nanocrystalline TiO 2 thin films. In Central European Journal of Physics, 2011, vol.9, no.5, p. 1351-1356. (0.691 - IF2010). (2011 - Current Contents). ISSN 1895-1082.
KOVÁČIK, Jaroslav - EMMER, Štefan. Thermal expansion of Cu-graphite composites: effect of copper coating. In Kovové materiály, 2011, vol. 49, no.6, pp.411-416. (0.471 - IF2010). (2011 - Current Contents, SCOPUS). ISSN 0023-432X.
LAPIN, Juraj - FRKÁŇOVÁ, K. Effect of processing routes on properties of plasma melted intermetallic Ti-Al-Ta ingots. In Kovové materiály, 2011, vol.49, no.4, p.243-251. (0.471 - IF2010). (2011 - Current Contents, SCOPUS). ISSN 0023-432X.
KÚDELA, Stanislav - PAWELEK, Andrzej - RANACHOWSKI, Z. - PIATKOWSKI, Andrzej - KÚDELA, Stanislav, Jr. - RANACHOWSKI, Przemyslaw. Effect of Al alloying on the Hall-Petch strengthening and AE in compressed Mg-Li-Al alloys before and after HPT processing. In Kovové materiály, 2011, roč. 49, s.271-277. (0.471 - IF2010). (2011 - Current Contents, SCOPUS). ISSN 0023-432X.
ŠTEFÁNIK, Pavol - IŽDINSKÝ, Karol - KAVECKÝ, Štefan - SIMANČÍK, František - NOSKO, Martin. Formation of nickel layer deposited on carbon fibres by galvanic method. In Kovové materiály, 2011, vol. 49, no.6, pp. 393-399. (0.471 - IF2010). (2011 - Current Contents, SCOPUS). ISSN 0023-432X.
BERONSKÁ, Naďa - IŽDINSKÝ, Karol - ŠTEFÁNIK, Pavol - KÚDELA, Stanislav, Jr. - SIMANČÍK, František - VÁVRA, Ivo - KRIŽANOVÁ, Zuzana. Structure and thermal expansion behaviour of Al/C composites reinforced with unidirectionally aligned continuous high modulus C fibres. In Kovové materiály, 2011, vol. 49, no. 6, pp. 427-436. (0.471 - IF2010). (2011 - Current Contents, SCOPUS). ISSN 0023-432X.
BESTERCI, Michal - IVAN, Jozef - HUANG, Song-Jeng - VELGOSOVÁ, Oksana - LIN, B.Z. - HVIZDOŠ, Pavol. Damage mechanism of AZ61-F Mg alloy with nano-Al2O3 particles. In Kovové materiály, 2011, roč. 49, č. 6, s. 451-455. (0.471 - IF2010). (2011 - Current Contents, SCOPUS). ISSN 0023-432X.
RANACHOWSKI, Przemyslaw - REJMUND, F. - RANACHOWSKI, Z. - PAWEŁEK, A. - PIĄTKOWSKI, A. - KÚDELA, Stanislav, Jr.. Mechanoacoustic and Microscopic Study of Aluminous Porcelain Resistance to Structural Degradation = Mechaniakustyczne i mikroskopowe badania odporności porcelany wysokoglinowej na degradacje struktury. In Archives of Metallurgy and Materials, 2011, vol. 56, no.4, p. 1227-1233. (0.262 - IF2010). (2011 - Current Contents). ISSN 1733-3490.
STEIN, George Juraj - CHMÚRNY, Rudolf - ROSÍK, Vladimír. Compact vibration measuring system for in-vehicle applications. In Measurement Science Review, 2011, vol. 11, no. 5, p. 154-159. (0.400 - IF2010). (2011 - WOS, Scopus, Copernicus International). ISSN 1335-8871.
KOLEŇÁK, R. - ŠEBO, Pavol - PROVAZNÍK, M. - KOLEŇÁKOVÁ, M. - ULRICH, K. Shear strength and wettability of active Sn3.5Ag4Ti(Ce,Ga) solder on Al2O3 ceramics. In Materials and Design, 2011, vol.32, p.3997-4003. (1.694 - IF2010). ISSN 0261-3069.
GEBURA, Marek - LAPIN, Juraj. The effect of multiaxial stress state on formation of rafts in CMSX-4 superalloy during creep. In Advanced Materials Research, 2010, vol.278, no., pp.222-227. ISSN 1022-6680.
FLOREK, Roman - SIMANČÍK, František - NOSKO, Martin - HARNÚŠKOVÁ, Jana. Compression test evaluation method for aluminium foam parts of different alloys and densities. In Powder Metallurgy Progress : Journal of Science and Technology of Particle Materials, 2010, vol.10, no.4, p. 207-212. ISSN 1335-8978.
NOSKO, Martin - FLOREK, Roman - SIMANČÍK, František. Effect of elevated temperature on the collapse stress of aluminium foam: experimental results. In Powder Metallurgy Progress, 2011, vol. 11, no.3-4, p.193-196. ISSN 1335-8978.
HAIN, Miroslav - NOSKO, Martin - SIMANČÍK, František - DVORÁK, Tomáš - FLOREK, Roman. Možnosti využitia RTG mikrotomografie v oblasti charakterizácie kovových materiálov = Possibilities of X-ray microtomography exploitation in characterisation of metallic materials. In Zváranie : odborný časopis so zameraním na zváranie a príbuzné technológie, 2011, roč.60, č.1-2, s.30-32. ISSN 0044-5525.
STANEKOVÁ, Hana. Microstructural stability of Ti-46Al-8Ta during creep. In Materiálové inžinierstvo, 2011, roč. 18, p.11-15. ISSN 1335-0803.
JERZ, Jaroslav. Platform innovmat supports industrial enterprises by application of advanced engineering materials. In MATRIB 2011 : materials - tribology - recycling. - Zagreb : Hrvatsko društvo za materijale i tribologiju, 2011, s.23. ISBN 978-953-7040-19-2.
STEIN, George Juraj - DARULA, R. - CHMÚRNY, Rudolf. A clamped-clamped beam static sag limits under perpendicular magnetic force. In ENGINEERING MECHANICS 2011 : international conference. - Prague : Institute of Thermomechanics Academy of Sciences of the Czech Republic, 2011, s.567-570. (2011 - WOS). ISBN 978-80-87012-33-8.
STEIN, George Juraj - DARULA, R. - SOROKIN, S. Control of transversal vibrations of a clamped-clamped beam by a permanent magnet and a shunt circuit. In EURODYN 2011 : Proceedings of the 8th international conference on Structural Dynamics. Stein,G.J., Darula G., Sorokin S. - Leuven : Department of Civil Engineering, 2011, s.1735-1741. ISBN 978-90-760-1931-4.
DARULA, Radoslav - SOROKIN, Sergey - STEIN, George Juraj. Numerical simulations of electromagnet exposed to vibration. In Applied mechanics 2011 : conference proceedings. - Brno : IPM ASCR, 2011, s.31-34. ISBN 978-80-87434-03-1.
STEIN, George Juraj - DARULA, R. - CHMÚRNY, Rudolf. A Clamped-Clamped beam static sag limits under perpendicular magnetic force. In 17th International Conference on Engineering Mechanics Location. - 2011.
DARULA, R. - STEIN, George Juraj - SOROKIN, Sergey. An Application of Electromagnetic Induction in Vibration Control. In Vibration Problems ICOVP 2011 : The 10th international conference on vibration problems. - London : Springer Science, 2011, s.447-453. (2011 - WOS). ISBN 978-94-007-2068-8.
KRÍŽIK, Peter - BALOG, Martin - SIMANČÍK, František - ŠVANTNER, Tomáš. The effect of extrusion temperature on Young`s modulus of Al/SiCP composite. In MATRIB 2011 : materials - tribology - recycling. - Zagreb : Hrvatsko društvo za materijale i tribologiju, 2011, s.33. ISBN 978-953-7040-19-2.
KRÍŽIK, Peter - BALOG, Martin - ILLEKOVÁ, Emília - ŠVEC, Peter - SIMANČÍK, František. Oxidation of Al and Al-based Gas Atomized Powders. In Euro PM 2011 : congress and exhibition. CD Proceedings. Barcelona, 9.-14.10.2011. - Shrewsbury : EPMA, 2011, s.301-308.
ČAVOJSKÝ, Miroslav - BALOG, Martin - SIMANČÍK, František - ŠVEC, Peter - ILLEKOVÁ, Emília - DVOŘÁK, Jiří. The structure and creep deformation characteristics of rapidly solidified ALCR4, 7FE1,1 (AT.%) bulk profiles. In MATRIB 2011 : materials - tribology - recycling. - Zagreb : Hrvatsko društvo za materijale i tribologiju, 2011, s.13. ISBN 978-953-7040-19-2.
BALOG, Martin - SIMANČÍK, František - WALCHER, Martin - RAJNER, Walter - POLETTI, Cecilia. SAP Concept, In Situ Formed Al-Al2O3 Composites - the Effect of Powder Size on Composite`s Mechanical Properties. In Euro PM 2011 : congress and exhibition. CD Proceedings. Barcelona, 9.-14.10.2011. - Shrewsbury : EPMA, 2011, s.307-312.
JERZ, Jaroslav - WILFINGER, Barbara - HULA, Robert Christian. Commercialization of knowledge acquired by R&D of advanced engineering materials. In Mechanical Technology and Structural Materials : international conference. - Split : Croatian Society for Mechanical Technologies, 2011, s.55-60. ISSN 1847-7917.
JERZ, Jaroslav - WILFINGER, Barbara - HULA, Robert Christian - IŽDINSKÁ, Zita. Knowledge management strengthens development of innovative products with extremely high added value. In ICERI 2011 : 4th international conference of education, research and innovation. ISBN 978-84-615-3324-4.
SENČEKOVÁ, Lucia - IŽDINSKÝ, Karol - ZEMÁNKOVÁ, Milina. Phase Transformations in the MO-SI binary system due to solid (MO) - liquid (SI) reaction. In MATRIB 2011 : materials - tribology - recycling. - Zagreb : Hrvatsko društvo za materijale i tribologiju, 2011, s.58. ISBN 978-953-7040-19-2.
GEBURA, Marek - KAVECKÝ, Štefan - JACKO, Vlado. Laserový optický emisný spektrometer LIBS LEA-S500. In Použitie moderných nedeštruktívnych meracích metód vo výskume nových materiálov v rámci centra excelentnosti CEKOMAT. - Bratislava : Ústav merania SAV, 2011, s. 64-67. ISBN 978-80-969672-3-0.
EMMER, Štefan - KOVÁČIK, Jaroslav. Príprava sonotródnych nástrojových materiálov a štúdium ich vlastností = Preparation on sonotrode tool materials and study of their properties. In TECHNOLÓGIA 2011. - Bratislava : STU, 2011, s.31-35. ISBN 978-80-227-3545-2.
EMMER, Štefan - KOVÁČIK, Jaroslav. Elektroiskrové nanášanie vrstiev na báze tvrdokovu WC-Co = Electro spark deposition of layers based on hard. In TECHNOLÓGIA 2011. - Bratislava : STU, 2011, s.26-30. ISBN 978-80-227-3545-2.
LAPIN, Juraj. Current status of research and development in structural TiAl-based alloys = Súčasný stav výskumu a vývoja konštrukčných zliatin na báze TiAl. In TECHNOLÓGIA 2011. - Bratislava : STU, 2011, s.3-21. ISBN 978-80-227-3545-2.
GABALCOVÁ, Zuzana - LAPIN, Juraj. Formovanie mikroštruktúry v zliatinách na báze TiAl počas kryštalizácie = Microstructure formation in TiAl-based alloys during solidification. In TECHNOLÓGIA 2011. - Bratislava : STU, 2011, s.187-195. ISBN 978-80-227-3545-2.
GEBURA, Marek - LAPIN, Juraj. Effect of multiaxial stress state on rafting in CMSX-4 superalloy during creep. In TECHNOLÓGIA 2011. - Bratislava : STU, 2011, s.44-50. ISBN 978-80-227-3545-2.
LOFAJ, František - MIKULA, Marian - GRANČIČ, B. - CEMPURA, Gregorz - HORŇÁK, Peter - KOTTFER, Daniel. Tribological properties of TiBx and WC/C coatings. In Preparation of Ceramic Materials : 9th International Conference. Herľany, 14.-16.6.2011. Eds. Tarzícius Kuffa ... [et al.]. - Košice : Technical University, 2011, p. 17-18. ISBN 978-80-553-0678-0.
HORŇÁK, Peter - FERDINANDY, Milan - LOFAJ, František - MIKULA, Marian - CEMPURA, Gregorz. Nanohardness study of magnetron sputtered TiBx and WC-Cx coatings. In Preparation of Ceramic Materials : 9th International Conference. Herľany, 14.-16.6.2011. Eds. Tarzícius Kuffa ... [et al.]. - Košice : Technical University, 2011, p. 166-167. ISBN 978-80-553-0678-0.
PELACHOVÁ, Tatiana - LAPIN, Juraj. Development of microstructure and lattice parameters of intermetallic phases in Ti-46Al-8Ta alloy during ageing AT 700-800 °C. In TECHNOLÓGIA 2011. - Bratislava : STU, 2011, s.128-135. ISBN 978-80-227-3545-2.
HAIN, Miroslav - NOSKO, Martin - SIMANČÍK, František - DVORÁK, Tomáš - FLOREK, Roman. RTG mikrotomografia: princípy a možnosti jej využitia v oblasti charakterizácie kovových materiálov. In Použitie moderných nedeštruktívnych meracích metód vo výskume nových materiálov v rámci centra excelentnosti CEKOMAT. - Bratislava : Ústav merania SAV, 2011, s.9-13. ISBN 978-80-969672-3-0.
HARNÚŠKOVÁ, Jana - ILLEKOVÁ, Emília - SIMANČÍK, František. Využitie diferenčnej termickej analýzy na sledovanie zmien v titánhydride po tepelnom spracovaní. In Použitie moderných nedeštruktívnych meracích metód vo výskume nových materiálov v rámci centra excelentnosti CEKOMAT. - Bratislava : Ústav merania SAV, 2011, s.48-51. ISBN 978-80-969672-3-0.
HAIN, Miroslav - NOSKO, Martin - SIMANČÍK, František - DVORÁK, Tomáš - FLOREK, Roman. X-ray microtomography and its use for non-destructive characterisation of materials. In MEASUREMENT 2011 : Proceedings of the 8th International Conference on Measurement. Editors J. Maňka, V. Witkovský, M. Tyšler, I. Frollo. - Bratislava : Institute of Measurement Science SAS, 2011, p. 123-126. ISBN 978-80-969-672-4-7.
STANEKOVÁ, H. - LAPIN, Juraj. Analysis of creep damage and creep fracture of intermetallic Ti-46Al-8Ta alloy = Analýza creepového poškodenia a lomu intermetalickej zliatiny Ti-46Al-8Ta. In TECHNOLÓGIA 2011. - Bratislava : STU, 2011, s.140-147. ISBN 978-80-227-3545-2.
STEIN, Juraj - DARULA, R. - CHMÚRNY, Rudolf - SOROKIN, V.S. Control of beam transversal vibration using an electromagnetic vibration controller. In Noise and Vibration in Practice : proceedings of the 16th international acoustic conference. - Bratislava : STU, 2011, s.95-100. ISBN 978-80-227-3512-4.
SUROVÝ, P. - EMMER, Štefan - KOVÁČIK, Jaroslav. Príprava kompozitného materiálu z oblasti mikro až nanočastíc s dispergovanou (vloženou) kompozitnou fázou = The preparation of particle composite material with particles of range from nano to micro scales. In TECHNOLÓGIA 2011. - Bratislava : STU, 2011, s.148-153. ISBN 978-80-227-3545-2.
CASTRO, E.A.B. - JONŠTA, Z. - HNATKO, Miroslav - KAVECKÝ, Štefan - ŠAJGALÍK, Pavol. Processing and properties of SiC-CNT ceramics. In Preparation of Ceramic Materials : 9th International Conference. Herľany, 14.-16.6.2011. Editors T. Kuffa et al. - Košice : Technical University, 2011, p. 8-12. ISBN 978-80-553-0678-0.
KAVECKÝ, Štefan - GEBURA, Marek - ŠEVČÍK, Roman. Analýza materiálov metódou spektrometrickej laserom indukovanej plazmy - LIBS. In Použitie moderných nedeštruktívnych meracích metód vo výskume nových materiálov v rámci centra excelentnosti CEKOMAT. - Bratislava : Ústav merania SAV, 2011, s.68-71. ISBN 978-80-969672-3-0.
ŠTEFÁNIK, Pavol - KAVECKÝ, Štefan - IŽDINSKÝ, Karol. Deposition of nickel on carbon fibres by galvanic method. In Konštrukčné materiály 2011 : Vedecká konferencia s medzinárodnou účasťou [elektronický zdroj]. - Žilina : Strojnícka fakulta ŽU, 2011.
IŽDINSKÝ, Karol - DVORÁK, Tomáš - BERONSKÁ, Naďa - ŠTEFÁNIK, Pavol - BAJANA, Otto - ŠEVČÍK, Robert. Využitie RTG mikrotomografie pri analýze príčin porušenia kompozitu Cu-Al2O3. In Použitie moderných nedeštruktívnych meracích metód vo výskume nových materiálov v rámci centra excelentnosti CEKOMAT. - Bratislava : Ústav merania SAV, 2011, s.14-17. ISBN 978-80-969672-3-0.
KRÍŽIK, Peter - SIMANČÍK, František - ŠVEC, Peter - ŠVEC, Peter Jr. Využitie dynamickej mechanickej analýzy pri charakterizovaní kompozitných materiálov. In Použitie moderných nedeštruktívnych meracích metód vo výskume nových materiálov v rámci centra excelentnosti CEKOMAT. - Bratislava : Ústav merania SAV, 2011, s.44-47. ISBN 978-80-969672-3-0.
ŠVEC, Peter - HOŠKO, Jozef - JANOTOVÁ, Irena - MAŤKO, Igor - ILLEKOVÁ, Emília - BALOG, Martin - ŠEBO, Pavol - ŠVEC, Peter. Enhancement of resolution in chemical mapping of alloy composites. In Použitie moderných nedeštruktívnych meracích metód vo výskume nových materiálov v rámci centra excelentnosti CEKOMAT. - Bratislava : Ústav merania SAV, 2011, s.56-59. ISBN 978-80-969672-3-0.
JANOTOVÁ, Irena - HOŠKO, Jozef - ŠVEC, Peter Jr. - SIMANČÍK, František - JANIČKOVIČ, Dušan - ŠVEC, Peter. Vývoj štruktúry a jej závislosť od chemického zloženia v systémoch na báze Fe-B. In Použitie moderných nedeštruktívnych meracích metód vo výskume nových materiálov v rámci centra excelentnosti CEKOMAT. - Bratislava : Ústav merania SAV, 2011, s. 60-63. ISBN 978-80-969672-3-0.
SIMANČÍK, František - HAIN, Miroslav - MATIAŠOVSKÝ, Peter - PECHÁŇOVÁ, Oľga - ŠVEC, Peter - ŠOOŠ, Ľubomír. Centrum excelentnosti na výskum a vývoj konštrukčných kompozitných materiálov pre strojárske, stavebné a medicínske aplikácie (CEKOMAT). In Použitie moderných nedeštruktívnych meracích metód vo výskume nových materiálov v rámci centra excelentnosti CEKOMAT. - Bratislava : Ústav merania SAV, 2011, s.1-5. ISBN 978-80-969672-3-0.
FRKÁŇOVÁ, K. - LAPIN, Juraj - TARABA, B. Solid phase transformations during continuous cooling of Ti-46Al-8Ta alloy. In TECHNOLÓGIA 2011. - Bratislava : STU, 2011, s.36-43. ISBN 978-80-227-3545-2.
LAPIN, Juraj. Microstructure characterisation and mechanical properties of intermetallic Ti-46Al-8Ta alloy. In METAL 2011 : 20.jubilejní ročník mezinárodní konference metalurgie a materiálů. - Brno : TANGER spol.s r.o., 2011. ISBN 978-80-87294-22-2.
FRKÁŇOVÁ, Katarína - LAPIN, Juraj. Plasma melting of air-hardenable TiAl-based alloy. In METAL 2011 : 20.jubilejní ročník mezinárodní konference metalurgie a materiálů. - Brno : TANGER spol.s r.o., 2011. ISBN 978-80-87294-22-2.
STANEKOVÁ, Hana - LAPIN, Juraj. Analysis of creep deformation behaviour and creep damage of intermetallic Ti-46Al-8Ya alloy. In METAL 2011 : 20.jubilejní ročník mezinárodní konference metalurgie a materiálů. - Brno : TANGER spol.s r.o., 2011. ISBN 978-80-87294-22-2.
ROCH, T. - MIKULA, Marian - GRANČIČ, B. - DURINA, P. - PLECENÍK, T. - PLECENÍK, Andrej - KUS, P. - VARGOVÁ, M. - PLESCH, Gustáv. Structure and morphology of functional thin TiO2 layers fabricated by sol-gel spincoating and DC reactice magnetron sputtering methods : poster. In Vrstvy a povlaky 2011 : Zborník prednášok. Rožnov pod Radhoštěm, 17.-18.10.2011. - Trenčín : Miloš Vavrík, 2011, s. 209. ISBN 978-80-970824-0-6.
GRANČIČ, B. - MIKULA, Marian - ROCH, T. - DOBROČKA, Edmund - KRIŽANOVÁ, Zuzana - ZEMAN, P. - MIČUŠÍK, Matej - ČIČKA, R. - ŠATKA, A. - SATRAPINSKYY, L. - ZAHORAN, M. - PLECENIK, Andrej - KÚŠ, P. High Temperature oxidation of silicon-doped titanium diboride coatings : poster. In Vrstvy a povlaky 2011 : Zborník prednášok. Rožnov pod Radhoštěm, 17.-18.10.2011. - Trenčín : Miloš Vavrík, 2011, s. 201. ISBN 978-80-970824-0-6.
LAPIN, Juraj - FRKÁŇOVÁ, Katarína - GABALCOVÁ, Zuzana. Microstructure evolution during solidification and solid phase transformations in TiAl-based alloy. In 4th International Workshop on Titanium Aluminides : abstract. - Nürnberg : GfE Metalle und Materialen GmbH, 2011, s.16 - 17/52.
GABALCOVÁ, Zuzana - LAPIN, Juraj. Solidification behaviour of TiAl-based alloys. In 4th International Workshop on Titanium Aluminides : abstract. - Nürnberg : GfE Metalle und Materialen GmbH, 2011, s.37 - 38/52.
LAPIN, Juraj - BAJANA, Otto - PELACHOVÁ, Tatiana. Mechanical behaviour of Ti-46Al-8Ta alloy. In 4th International Workshop on Titanium Aluminides : abstract. - Nürnberg : GfE Metalle und Materialen GmbH, 2011, s.20 - 21/52.
ADAMČÍKOVÁ, Andrea - HARNÚŠKOVÁ, Jana - SIMANČÍK, František - FLOREK, Roman - NOSKO, Martin. Stabilization of aluminium melt. In MATRIB 2011 : materials - tribology - recycling. - Zagreb : Hrvatsko društvo za materijale i tribologiju, 2011, s. 8. ISBN 978-953-7040-19-2.
STANEKOVÁ, Hana - LAPIN, Juraj - PELACHOVÁ, Tatiana - DOMÁNKOVÁ, Mária. Controlling mechanisms of creep deformation of new air-hardenable TiAl-based alloy. In ISPMA 12 : international symposium on physics of materials. - Praha : UK, 2011, s.44.
LAPIN, Juraj - STANEKOVÁ, Hana. Creep deformation of intermetallic TiAl-based alloy. In ISPMA 12 : international symposium on physics of materials. - Praha : UK, 2011, s.94.
BESTERCI, Michal - VELGOSOVÁ, Oksana - IVAN, Jozef - BALLÓKOVÁ, Beáta - SÜLLEIOVÁ, Katarína. Model of "in-situ tensile test in SEM" of Al-Al4C3 nanomaterials. In YUCOMAT 2011 : 13th annual conference. Programme and the book of abstracts. Herceg Novi, Montenegro, 5.-9.9.2011. - Belgrade : Materials Research Society of Serbia, 2011, p. 37.
NOSKO, Martin - FLOREK, Roman - SIMANČÍK, František. Effect of elevated temperature on the collapse stress of aluminium foam: experimental results : abstract. In Deformation and Fracture in PM Materials : DF PM 2011. - Košice : Institute of Materials Research SAS, 2011, s.37.
HNATKO, Miroslav - BOLAŇOŠ, E.A.C. - KAVECKÝ, Štefan - JONŠTA, Z. - ŠAJGALÍK, Pavol. Príprava a vlastnosti kompozitnej SiC - CNT keramiky. In ChemZi : Medzinárodný rok chémie: Slovenský časopis o chémii pre chemické vzdelávanie, výskum a priemysel: 63. Zjazd chemikov. - Bratislava : Slovenská chemická spoločnosť, 2011, roč. 7, č. 13, s. 96. ISSN 1336-7242.
MIKULA, Marian - GRANČIČ, B. - HOŠKO, Jozef - PULC, Vojtech. Nanoštruktúrované tvrdé vrstvy v priemyselnej praxi. In Magazín stavebné stroje a mechanizácia : odborný časopis o stavebných strojoch a mechanizácii, 2011, roč.6, č.1, s.22-23. ISSN 1336-958X.
SIMANČÍK, František - KRÍŽIK, Peter - ŠVEC, Peter. Možnosti odľahčovania konštrukcií pomocou nových materiálov. In Magazín stavebné stroje a mechanizácia : odborný časopis o stavebných strojoch a mechanizácii, 2011, roč.6, č.3, s.42-44. ISSN 1336-958X.
ČAVOJSKÝ, Miroslav. Vysokopevné hliníkové zliatiny pripravené rýchlym chladením taveniny : dizertačné doktorandské práce (PhD.,Dr.). Peter Jurči, Branislav Hadzima. Trnava, 2011. Materiálovotechnologická fakulta STU v Trnave.
ADAMČÍKOVÁ, Andrea. Príprava penového hliníka priamym speňovaním z taveniny : kandidátska dizertačná práca. Eva Tillová, Peter Pinke. Trnava, 2011. MTF STU v Trnave.
Použitie moderných nedeštruktívnych meracích metód vo výskume nových materiálov v rámci centra excelentnosti CEKOMAT. Editori M. Hain, K. Karovič, J. Jerz. Bratislava : Ústav merania SAV, 2011. 100 s. ISBN 978-80-969672-3-0.
Porous Metals and Metallic Foams : proceedings of the 6th international conference on Porous Metals and Metallic Foam = MetFoam 2009. František Simančík and Jaroslav Jerz. Bratislava : Institute of Materials & Machine Mechanics SAS, 2011. 629 s. ISBN 978-80-970771-0-5.
ČAVOJSKÝ, Miroslav. The microstructure of rapidly solidified AlCr5Fe0.85 bulk profiles : poster. In Deformation and Fracture in PM Materials : DF PM 2011. - Košice : Institute of Materials Research SAS, 2011.
FLOREK, Roman. Impact absorber of aluminium foam for railway carriages : poster. In Deformation and Fracture in PM Materials : DF PM 2011. - Košice : Institute of Materials Research SAS, 2011.
HARNÚŠKOVÁ, Jana. Aluminium foams of heat-treatable aluminium alloys : poster. In Deformation and Fracture in PM Materials : DF PM 2011. - Košice : Institute of Materials Research SAS, 2011.
SENČEKOVÁ, Lucia. Reaction of molybdenum with molten silicon : poster. In Deformation and Fracture in PM Materials : DF PM 2011. - Košice : Institute of Materials Research SAS, 2011.
KRÍŽIK, Peter - SIMANČÍK, František - BALOG, Martin. Young`s modulus of Al-SiCp composites prepared by powder metallurgy : poster. In Deformation and Fracture in PM Materials : DF PM 2011. - Košice : Institute of Materials Research SAS, 2011.
BALOG, Martin - SIMANČÍK, František - POLETTI, Cecilia. The effect of powder surface area on mechanical properties of extruded Al-Al2O3 composites formed in situ during consolidation of ultra-fine Al powders : poster. In Deformation and Fracture in PM Materials : DF PM 2011. - Košice : Institute of Materials Research SAS, 2011.
ŠVANTNER, Tomáš - BALOG, Martin - QIAN, M. Ultra-fine grained in-situ formed Al-AIN metal matrix composites : poster. In Deformation and Fracture in PM Materials : DF PM 2011. - Košice : Institute of Materials Research SAS, 2011.