JERZ, Jaroslav. Výroba a průmyslové využití pĕnového hliníku. In MICHNA, Štefan - LUKÁČ, Ivan - OČENÁŠEK, Vladivoj. Encyklopedie hliníku. - Děčín : Alcan Děčín Extrusions, 2005, s.642-653. ISBN 80-89041-88-4.
KAVECKÝ, Štefan - ŠAJGALÍK, Pavol. Carbon nanotubes prepared by CVD. In Trans Tech Publications. Fractography of Advanced Ceramics II. - Uetikon-Zuerich : Trans Tech Publications, 2005. ISBN 0-87849-973-3.
KOVÁČIK, Jaroslav. Correlation between Poisson´s ratio and porosity in porous materials. In Journal of Materials Science Letters, 2006, vol. 41, p. 1247-1249. ISSN 0261-8028.
KROPÁČ, Oldřich - MÚČKA, Peter. Longitudinal road unevenness with periodic components: Characterization and effects on people in a traversing vehicle and the loading of the pavement. In Proceedings of the Institution of Mechanical Engineers Part D : Journal of Automobile Engineering, 2005, vol. 219, p.773-790.
MURIN, Jozef. A controlled diesel drive line with hydrostatic transmission: Part 1 - mathematical model. In International Journal of Vehicle Design. - Geneve : International association for vehicle design, 2004, vol. 38, nos.2/3, p.109-122. ISSN 0143-3369.
MURIN, Jozef. A controlled diesel drive line with hydrostatic transmission: Part 2 - dynamic properties at periodic loading. In International Journal of Vehicle Design. - Geneve : International association for vehicle design, 2005, vol. 38, nos.2/3, p.123-138. ISSN 0143-3369.
BALOG, Martin - NAGY, Juraj - IŽDINSKÝ, Karol - SIMANČÍK, František. Compaction of ultra-fine Al powders. In International Journal of Materials and Product Technology, 2005, vol. 23, nos.1/2, p.69-78. ISSN 0268-1900.
NAGY, Juraj - BALOG, Martin - IŽDINSKÝ, Karol - SIMANČÍK, František - ŠVEC, Peter - JANIČKOVIČ, Dušan. High strength potential of aluminium nanocomposites reinforced with nonperiodical phases. In International Journal of Materials and Product Technology, 2005, vol. 23, nos.1/2, p.79-90. ISSN 0268-1900.
PRODI, Nicola - VELECKÁ, Sylvia. A scale value for the balance inside a historical opera house. In Journal of the Acoustical Society of America. - New York : American Institute of Physics, 2005, vol. 117, no.2, p.771-779. ISSN 0001-4966.
KÚDELA, Stanislav - WENDROCK, H - KÚDELA, Stanislav, Jr. - PTÁČEK, L. - MENZEL, S. - WETZIG, Klaus. Effect of interfaces on fiber fracture in Mg and MgLi matrix composites. In Materials Science Forum, 2005, vol. 482, p. 355-358. ISSN 0255-5476.
BALLÓKOVÁ, Beáta - HVIZDOŠ, Pavol - BESTERCI, Michal - IVAN, Jozef - ZUMDICK, Marcus - BÖHM, Alexander - WEISSGÄRBER, Thomas - KIEBACK, Bernd. Microstructure and mechanical properties of ZrO2-reinforced MoSi2 matrix composites. In International Journal of Materials and Product Technology, 2005, vol. 22, no. 4, p. 322-327. ISSN 0268-1900.
KUDLIČKA, Ján. Dispersion of torsional waves in a thick-walled transversely isotropic circular cylinder of infinite length. In Journal of Sound and Vibration, 2006, vol. 294, no.1-2, p. 368-373. ISSN 0022-460 X.
LAPIN, Juraj. Creep behaviour of a cast TiAl-based alloy for industrial applications. In Intermetallics. - Oxford : Elsevier Science, 2006, vol. 14, no.2, p.115-122. ISSN 0966-9795.
KROPÁČ, Oldřich - MÚČKA, Peter. Be careful when using the International Roughness Index as an indicator of road unevenness. In Journal of Sound and Vibration, 2005, vol. 287, p. 989-1003. ISSN 0022-460 X.
RUDAJEVOVÁ, A. - KÚDELA, Stanislav, Jr. - KÚDELA, Stanislav - LUKÁČ, Pavel. Anisotropy of the thermal expansion in Mg fibre composites. In Scripta Materialia. - Oxford : Elsevier Science, 2005, vol. 53, p.1417-1420. (2005 - Current Contents, SCOPUS). ISSN 1359-6462.
GRANČIČ, B. - MIKULA, Marian - HRUBÁ, L. - GREGOR, M. - ŠTEFEČKA, M. - CSUBA, Adrian - DOBROČKA, Edmund - PLECENIK, Andrej - KÚŠ, P. The influence of deposition parameters on TiB2 thin films prepared by DC magnetron sputtering. In Vacuum, 2005, vol. 80, p. 174-177. ISSN 0042-207X.
MÜLLEROVÁ, Katarína - KOVÁČIK, Jaroslav - SIMANČÍK, František - ŠVEC, Peter. Al-based systems with unusual mechanical and trnsport properties. In Physica Status Solidi B, 2005, vol. 242, no. 3, p. 637-644. ISSN 0370-1972.
BESTERCI, Michal - ŠLESÁR, Milan - SÜLLEIOVÁ, Katarína - IVAN, Jozef - ZBIRAL, Johannes. Microstructure, mechanical properties and fracture of Pt-Y2O3 composites. In High Temperature Materials and Processes, 2005, vol. 24, no.1, p. 79-83. (0.325 - IF2004). (2005 - Current Contents, WOS). ISSN 0334-6455.
LAPIN, Juraj. Creep of a cast intermetallic TiAl-based alloy. In Kovové materiály, 2005, roč. 43, s. 81-92. (2005 - Current Contents). ISSN 0023-432X.
LAPIN, Juraj - BAJANA, Otto. Effect of the growth rate on the microstructure and room-temperature tensile properties of directionally solidified Ni3Al-based in-situ composites. In Kovové materiály, 2005, roč. 43, č. 3, s. 169-181. (2005 - Current Contents). ISSN 0023-432X.
ŠEBO, Pavol - ŠTEFÁNIK, Pavol. Effect of In Addition on Sn-Ag Solder, its Wetting and Shear Strength of Copper Joints. In Kovové materiály, 2005, roč. 43, č. 3, s. 202-209. (2005 - Current Contents). ISSN 0023-432X.
GONDÁR, Ernest - ROŠKO, Miroslav - ZEMÁNKOVÁ, Milina. Study of Depth Profile of Identation Cracks in Silicon Nitride. In Kovové materiály, 2005, roč. 43, č. 2, s. 124-133. (2005 - Current Contents). ISSN 0023-432X.
KROPÁČ, Oldřich - MÚČKA, Peter. Podélné nerovnosti vozovek - poznatky z rozsáhlých měření in situ. In Stavební obzor : odborný měsíčník. - Praha : Fakulta stavební ČVUT, 2005, č.5, s.154-160. ISSN 1210-4027.
DANNINGER, Herbert - ROUZBAHANI, Fardin - HAROLD, Christian - PONEMAYR, Helmut - DAXELMÜLLER, Manfred - SIMANČÍK, František - IŽDINSKÝ, Karol. Heat treatment and properties of precipitation hardened carbon-free PM tool steels. In Powder Metallurgy Progress, 2005, vol. 5, no. 2, p. 92-103. ISSN 1335-8978.
ŠEBO, Pavol - ŠVEC, Peter - JANÍČKOVIČ, Dušan. Budúcnosť spájkovania bez olova = Future of lead-free soldering. In Zváranie : odborný časopis so zameraním na zváranie a príbuzné technológie. - Bratislava : Výskumný ústav zváračský, 2005, roč. 54, č. 3, s. 82-84. ISSN 0044-5525.
STEIN, George Juraj. On calibration uncertainty estimation in ratio-metric measurements. In Measurement Science Review : journal published by Institute of Measurement Science, Slovak Academy of Sciences, 2005, vol. 5, p.31-34. ISSN 1335-8871.
JERZ, Jaroslav - SIMANČÍK, František - FLOREK, Roman - NOSKO, Martin. Light-weight structural design using of metallic foams. In GRILEC, Krešimir. MATRIB ´05 : 10. conference on materials, processes, friction and wear. - Vela Luka : Croatian Society for Materials and Tribology, 2004, s.95-101.
SIMANČÍK, František - IŽDINSKÝ, Karol. Nanostructured high strength aluminium profiles. In European Powder Metallurgy Association. EURO PM 2005 : Congress et Exhibition. - Shrewsbury : European Powder Metallurgy Association, 2005, volume 2. ISBN 1899072 18 7.
SIMANČÍK, František. Porous Materials: PM Aluminium Foams. In EPMA. Powder Metallurgy Training Courses : Design and Capabilities of PM Components and Materials. - Aachen : EPMA, 2005, s.385-412.
SIMANČÍK, František - FLOREK, Roman. Reinforced Aluminium Foams - A Promising Solution for Lightweight Load-bearing Components. In Osaka University. Porous Metals and Metal Foaming Technology. - Osaka : Osaka University, 2005.
LAPIN, Juraj - NAZMY, Mohamed - STAUBLI, Marc. Effect of Long-Term Aging and Creep Exposure on the Microstructure of TiAl-Based Alloy for Industrial Applications. In MRS. Materials Research Society Symposium Proceedings. - Warrendale : MRS, 2005, s.S7.11.1-7.11.5.
STEIN, George Juraj - MÚČKA, Peter - CHMÚRNY, Rudolf. Development of a X-direction apparent mass model of human body sitting in a cushioned, suspended seat. In INRS. Whole-Body Vibration injuries : 3rd International Conference. - Nancy : INRS, 2005, s.65-66.
STEIN, George Juraj. On a-type (statistical) uncertainty estimation in whole body vibration measurements. In ENSIM. Managing Uncertainties in Noise Measurements and Prediction : An International-Ince Symposium. - Le Mans : ENSIM, 2005.
KORÁB, Juraj - ŠTEFKE, Ľubomír. Gas pressure infiltration of copper into porous carbon/graphite bodies. In GRILEC, Krešimir. MATRIB ´05 : 10. conference on materials, processes, friction and wear. - Vela Luka : Croatian Society for Materials and Tribology, 2004, s.103-108.
ZAHORANSKÝ, Radúz - STEIN, George Juraj. Modelling and simulation of kinematically excited vibration isolation systems with friction, under random and harmonic excitation. In Eindhoven University of Technology. ENOC-2005 : fifth EUROMECH Nonlinear Dynamics Conference. - Eindhoven : Eindhoven University of Technology, 2005, s.2663-2671. ISBN 90 386 2667 3.
BALOG, Martin - IŽDINSKÝ, Karol - NAGY, Juraj - SIMANČÍK, František - DONIČ, T. Ultra-fine grained PM Al profiles. In Institute of Materials Research SAS. Deformation and fracture in structural PM Materials : proceedings of the international conference, s.301-307. ISBN 80-968543-4-8.
NAGY, Juraj - BALOG, Martin - IŽDINSKÝ, Karol - SIMANČÍK, František - JANIČKOVIČ, Dušan - ŠVEC, P. Consolidation of Al-based melt-spun ribbons. In Institute of Materials Research SAS. Deformation and fracture in structural PM Materials : proceedings of the international conference, s.106-116. ISBN 80-968543-4-8.
WISZT, Erich - WISZTOVÁ, Elena. The influence of fast extitation on a linear continuous system vibration. In STU. Strojné inžinierstvo 2005. - Bratislava : STU Bratislava, 2005, s.417-428. ISBN 80-227-2314-2.
BALLO, Igor. Effectiveness of the active and semiactive vibration control systems. In Institute of Thermomechanics AS CR. Engineering Mechanics 2005 : national conference with international participation. - Prague : Institute of Thermomechanics AS CR, 2005. ISBN 80-85918-93-5.
KUDLIČKA, Ján. Dispersion of torsion waves in a three-layered annular composite cylinder. In Institute of Thermomechanics AS CR. Interaction and Feedbacks ´2005. - Prague : Institute of Thermomechanics AS CR, 2005, s.63-68. ISBN 80-859118-95-1.
MAŇKA, Martin. Composites with elastometric matrix. In Institute of Thermomechanics AS CR. Interaction and Feedbacks ´2005. - Prague : Institute of Thermomechanics AS CR, 2005, s.69-76. ISBN 80-859118-95-1.
SIMANČÍK, František - BALOG, Martin - NAGY, Juraj - IŽDINSKÝ, Karol. High strength profiles made by consolidation of Al-based melt-spun ribbons. In Warsaw University of Technology. Microsymposium on the nanocrystalline Al alloys. - Warsaw : Warsaw University of Technology, 2005.
JERZ, Jaroslav - SIMANČÍK, František. Aluminium foam prepared by powder metallurgy. In Alcan. Aluminium 2005 : 4.mezinárodní konference. - Děčín : Alcan Děčín Extrusions s.r.o., 2005, s.210-215.
NAGY, Juraj - SIMANČÍK, František - JERZ, Jaroslav - BALOG, Martin - IŽDINSKÝ, Karol. Fine grained Al-profiles made by powder metallurgy. In Alcan. Aluminium 2005 : 4.mezinárodní konference. - Děčín : Alcan Děčín Extrusions s.r.o., 2005, s.228-235.
ŠLÍŽEK, Oldřich. Sensitivity Analysis. In Institute of Thermomechanics AS CR. Interaction and Feedbacks ´2005. - Prague : Institute of Thermomechanics AS CR, 2005, s.131-134. ISBN 80-859118-95-1.
WISZT, Erich - WISZTOVÁ, Elena. Energy Flow Paths Model. In Institute of Thermomechanics AS CR. Interaction and Feedbacks ´2005. - Prague : Institute of Thermomechanics AS CR, 2005, s.161-168. ISBN 80-859118-95-1.
ZAHORANSKÝ, Radúz - STEIN, George Juraj - CHMÚRNY, Rudolf. Dry-friction effects modelling in kinematically excited vibration isolation systems. In Institute of Thermomechanics AS CR. Dynamika strojů : national colloquium with international participation. - Prague : Institute of Thermomechanics AS CR, s.155-162. ISBN 80-85918-79-X.
IŽDINSKÝ, Karol - CSUBA, Adrian - IŽDINSKÁ, Zita - JAŠ, M. Horčík a jeho zliatiny a ich uplatnenie v automobilovom priemysle. In STU. Technológia 2005 : zborník prednášok. - Bratislava : SjF STU, 2005, s.750-754. ISBN 80-227-2264-2.
EMMER, Štefan - BIELEK, J - KOVÁČIK, Jaroslav. Príprava a štúdium vlastností kompozitného materiálu z prášku medi a uhlíkových nanovlákien. In STU. Technológia 2005 : zborník prednášok. - Bratislava : SjF STU, 2005, s.67-71. ISBN 80-227-2264-2.
GABALCOVÁ, Zuzana - BAJANA, Otto - LAPIN, Juraj. Vplyv tepelného spracovania na mikroštruktúru a mechanické vlastnosti odlievanej intermetalickej zliatiny na báze TiAl. In STU. Technológia 2005 : zborník prednášok. - Bratislava : SjF STU, 2005, s.131-137. ISBN 80-227-2264-2.
SIMANČÍK, František. New aluminium based materials for car body structures. In STU. Technológia 2005 : zborník prednášok. - Bratislava : SjF STU, 2005, s.116. ISBN 80-227-2264-2.
DANNINGER, H. - ROUZBAHANI, F. - HAROLD, C. - PONEMAYR, H. - DAXELMÜLLER, M. - SIMANČÍK, František - IŽDINSKÝ, Karol. Effect of heat treatment on hardness and formability of carbon-free tool steels. In Institute of Materials Research SAS. Deformation and fracture in structural PM Materials : proceedings of the international conference. ISBN 80-968543-4-8.
STEIN, George Juraj. On calibration uncertainty estimation in ratio-metric measurements. In Veda. Measurement 2005. - Bratislava : VEDA, 2005. ISBN 80-967402-8-8.
JANIČKOVIČ, Dušan - ŠEBO, Pavol. Výroba bezolovnatých fóliových spájok. In SZS. Bezolovnaté spájky v elektrotechnickom priemysle. - Bratislava : SZS, 2005.
ŠEBO, Pavol - ŠTEFÁNIK, Pavol. Vplyv tepelného cyklovania na šmykovú pevnosť spojov Cu-Sn-3,5Ag-In-Cu s rôznym obsahom india. In SZS. Bezolovnaté spájky v elektrotechnickom priemysle. - Bratislava : SZS, 2005.
ŠEBO, Pavol - JANIČKOVIČ, Dušan - ŠVEC, Peter. Využitie bezolovnatých spájok na Slovensku. In SZS. Bezolovnaté spájky v elektrotechnickom priemysle. - Bratislava : SZS, 2005.
VAŇO, Andrej - LAPIN, Juraj. Hrubnutie precipátov v polyfázovej intermetalickej zliatine na báze niklu vplyvom tepelného spracovania. In STU. Technológia 2005 : zborník prednášok. - Bratislava : SjF STU, 2005, s.263-268. ISBN 80-227-2264-2.
BALOG, Martin - IŽDINSKÝ, Karol - NAGY, Juraj - SIMANČÍK, František. Ultra-fine grained PM Al profiles containing quasicrystalline phase. In Institute of Materials Research SAS. NENAMAT : mobilization Workshop-Slovakia, s.24.
SIMANČÍK, František - BALOG, Martin - NAGY, Juraj - IŽDINSKÝ, Karol. Nanostructured high strength aluminium profiles. In GRILEC, Krešimir. MATRIB ´05 : 10. conference on materials, processes, friction and wear. - Vela Luka : Croatian Society for Materials and Tribology, 2004.
ŠEBO, Pavol - ŠTEFÁNIK, Pavol. Effect of in Addition on Sn-Ag Solder, Wetting and Shear Strenght of Copper Joints. In EPFL. COST Action 531 : Lead-free Solder Materials. - Lausanne : EPFL, 2005.
HORVÁTH, Ivan. FP6 latest calls information on projects submission in NMP priority in 2005. In IMMM SAS. International Conference on Advanced Materials, Micro- and Nanotechnology. - Bratislava : IMMM SAS, 2005.
SIMANČÍK, František. Nano-Structured Materials Research at the Institute of Materials and Machine Mechanics SAS: Development of bulk nanostructured high strength metallic materials. In Institute of Materials Research SAS. Nenamat : mobilization Workshop-Slovakia. - Košice : Institute of Materials Research SAS, 2005.
BALOG, Martin - IŽDINSKÝ, Karol - NAGY, Juraj - SIMANČÍK, František. Ultra-fine grained PM Al profiles containing quasicrystalline phase. In IMMM SAS. International Conference on Advanced Materials, Micro- and Nanotechnology. - Bratislava : IMMM SAS, 2005.
NAGY, Juraj - BALOG, Martin - SIMANČÍK, František - IŽDINSKÝ, Karol. Study of Al-based melt-spun ribbons and their consolidation into bulk profiles. In IMMM SAS. International Conference on Advanced Materials, Micro- and Nanotechnology. - Bratislava : IMMM SAS, 2005.
NAGY, Juraj - BALOG, Martin - SIMANČÍK, František - IŽDINSKÝ, Karol - ŠVEC, Peter - JANIČKOVIČ, Dušan. Study of Al-based melt-spun ribbons and their consolidation into bulk profiles. In Institute of Materials Research SAS. Nenamat : mobilization Workshop-Slovakia. - Košice : Institute of Materials Research SAS, 2005, s.43.
HRUBÁ, Ľ. - GRANČIČ, B. - MIKULA, Marián - VALČUHA, Štefan - KÚŠ, P. Properties of the thin TiB2 coatings prepared by DC magnetron sputtering. In University of Technology. COMMENT´2005 : Worldwide Congress on Materials and Manufacturing Engineering and Technology. - Gliwice : The Institute of Engineering Materials and Biomaterials of the Silesian University of Technology, 2005, s.246-249. ISBN 83-89728-12-5.
ŠEBO, Pavol - ŠTEFÁNIK, Pavol. Shear strength of copper joints prepared with lead-free snagin solder. In STU. Technológia 2005 : zborník prednášok. - Bratislava: SjF STU, 2005, s.238. ISBN 80-227-2264-2.