KOŠÚT, Ján. Quadratic damage rule in random loading case. In Fatigue and Fracture of Engineering Materials and Structures. - Sheffield : Blackwell Publishing, 2004, vol. 27, p.679-700. ISSN 8756-758X.
LAPIN, Juraj. Embrittlement of directionally solidified Zr-doped multiphase intermetallic Ni-Al-Cr-Ta-Mo alloy after heat treatment. In Scripta Materialia, 2004, vol. 51, p. 733-738. ISSN 1359-6462.
RUDAJEVOVÁ, A. - LUKÁČ, Pavel - KÚDELA, Stanislav. Influence of Li content on thermal strains in MgLi-Saffil fibre composites. In Journal of Alloys and Compounds, 2004, vol. 378, p. 172-175. ISSN 0925-8388.
LAPIN, Juraj. Microstructure and mechanical properties of iron aluminides processed by reactive squeeze infiltration. In Materials Letters, 2004, vol. 58, p. 3007-3011. ISSN 0167-577X.
KROPÁČ, Oldřich - MÚČKA, Peter. Non-standard longitudinal profiles of roads and indicators for their characterisation. In International Journal of Vehicle Design. - Geneve : International association for vehicle design, 2004, vol. 36, nos. 2/3, p.149-172. ISSN 0143-3369.
MÚČKA, Peter. Road waviness and the dynamic tyre force. In International Journal of Vehicle Design. - Geneve : International association for vehicle design, 2004, vol. 36, nos. 2/3, p.216-232. ISSN 0143-3369.
MURIN, Jozef. Some properties of a diesel drive line with hydrodynamic torque converters of the latest generation. In Mechanism and Machine Theory. - Oxford : Elsevier, 2005, vol. 40, p.99-117. ISSN 0094-114X.
LAPIN, Juraj - NAZMY, M. Microstructure and creep properties of a cast intermetallic Ti-46Al-2W-0.5Si alloy for gas turbine applications. In Materials Science and Engineering. A.Structural Materials, 2004, vol. A380, p. 298-307. (1.363 - IF2003). (2004 - Current Contents, WOS, SCOPUS). ISSN 0921-5093.
PRITULA, Ondrej - SMRČOK, Ľubomír - IVAN, Jozef - IŽDINSKÝ, Karol. X-Ray quantitative phase analysis of residues of the reference portland clinkers. In Ceramics-Silikáty, 2004, vol. 48, no. 1, p. 34-39. (2004 - Current Contents). ISSN 0862-5468.
DROZD, Zdeněk - TROJANOVÁ, Zuzanka - KÚDELA, Stanislav. Deformation behaviour of Mg-Li-Al alloys. In Journal of Alloys and Compounds, 2004, vol. 378, p. 192-195. ISSN 0925-8388.
BESTERCI, Michal - IVAN, Jozef - PEŠEK, Ladislav - VELGOSOVÁ, Oksana - HVIZDOŠ, Pavol. Damage mechanism of Al-12Al4C3. In Materials Letters, 2004, vol. 58, p. 867-870. ISSN 0167-577X.
BESTERCI, Michal - IVAN, Jozef - VELGOSOVÁ, Oksana - HVIZDOŠ, Pavol. Influence of Al4C3 particle volume fraction on fracture mechanism in Al-Al4C3 composite. In Journal of Materials Science, 2004, vol. 39, no. 3, p.1071-1074. (0.826 - IF2003). (2004 - Current Contents, WOS, SCOPUS). ISSN 0022-2461.
KÚDELA, Stanislav - OSWALD, Steffen - KÚDELA, Stanislav, Jr. - BAUNACK, S - WETZIG, Klaus. The ion exchange promoted interfacial strength in magnesium based composites. In Journal of Alloys and Compounds, 2004, vol. 378, p.127-131. ISSN 0925-8388.
JÁROŠI, Marián. Výpočet prierezových vlastností celulárnych materiálov. In Kovové materiály, 2004, roč. 41, č. 6, s. 423-434. ISSN 0023-432X.
KOVÁČIK, Jaroslav - EMMER, Štefan - BIELEK, Jozef. Thermal properties of Cu-graphite composite. In Kovové materiály, 2004, roč. 42, č.6, s.365-374. ISSN 0023-432X.
LAPIN, Juraj - PELACHOVÁ, Tatiana. Microstructural stability and microhardness of a cast TiAl-based alloy for turbine blade applications. In Kovové materiály, 2004, roč. 42, č. 3, s. 143-155. ISSN 0023-432X.
KOVÁČIK, Jaroslav - SIMANČÍK, František. Comparison of zinc and aluminium of foam behaviour. In Kovové materiály, 2004, roč. 42, č. 2, s. 79-90. ISSN 0023-432X.
ŠTEFÁNIK, Pavol - HUDCOVIČ, Peter - ŠEBO, Pavol. Influence of volume fraction and orientation of carbon fibres on heat transfer in undirectional copper matrix composites. In Kovové materiály, 2004, roč. 42, č. 5, s. 329-338. ISSN 0023-432X.
ŠEBO, Pavol - ŠTEFÁNIK, Pavol - KAVECKÝ, Štefan. Joining of copper-carbon fibre composite with gold coated alumina by low temperature In-Pb and soldamol 170 solders. In Kovové materiály, 2004, vol. 42, no.1, p. 1-8. ISSN 0023-432X.
VAŇO, Andrej - PELACHOVÁ, Tatiana. Vplyv tepelného spracovanie na mikroštruktúru dendritov usmernene kryštalizovanej polyfázovej intermetalickej zliatiny na báze niklu. In Kovové materiály, 2004, roč. 42, č. 2, s.121-131. ISSN 0023-432X.
IŽDINSKÝ, Karol - IVAN, Jozef - ZEMÁNKOVÁ, Milina - CSUBA, Adrian - MINÁR, Pavol - IŽDINSKÁ, Zita. Microstructure of air plasma-sprayed NiAl coating isothermally exposed at 850 °C for 6 minutes. In Kovové materiály, 2004, roč. 42, č. 5, s. 316-328. ISSN 0023-432X.
PTÁČEK, Luděk - KÚDELA, Stanislav. Analýza struktury kompozitních materiálů s hořčíkovou matricí. In Slévárenství : časopis pro slévárenský průmysl. - Brno : Svaz sléváren ČR, 2004, 2004, roč. 52, č.6, s.217-220. ISSN 0037-6825.
SADLOŇOVÁ, Jurina - KORPÁŠ, Juraj - ŠALÁT, D. - MIKO, L. - KUDLIČKA, Ján. The effect of pulsatile electromagnetic field in children suffering from bronchial asthma. In Acta Physiologica Hungarica. - Budapest : Akadémiai Kiadó, 2003, vol. 90, no. 4, p. 327-334. ISSN 0231-424X.
KLIMAN, Vladimír - JÁROŠI, Marián. Systém kontinuálneho hodnotenia únavovej spoľahlivosti konštrukcií. In Strojnícky časopis. - Bratislava : Ústav materiálov a mechaniky strojov SAV, 1959-, 2003, roč. 55, č. 5, s.293-307. ISSN 0039-2472.
KLIMAN, Vladimír - JÁROŠI, Marián. Systém kontinuálneho hodnotenia únavovej spoľahlivosti konštrukcií. Časť I. Metodika. In Strojnícky časopis. - Bratislava : Ústav materiálov a mechaniky strojov SAV, 1959-, 2004, roč. 55, č. 4, s. 218-234. ISSN 0039-2472.
KROPÁČ, Oldřich - MÚČKA, Peter. Estimation of road waviness using the IRI algorithm. In Strojnícky časopis. - Bratislava : Ústav materiálov a mechaniky strojov SAV, 1959-, 2004, roč. 55, č. 5, s. 308-313. ISSN 0039-2472.
ONDRÚŠ, Ľuboš - LAPIN, Juraj. Microstructure - mechanical property relationships in a directionally solidified TiAl-based alloy. In Acta Metallurgica Slovaca. - Košice : Technická univerzita - Hutnícka fakulta : Ústav materiálového výskumu SAV, 2004, roč. 10, č. 1, s. 535-540. ISSN 1338-1156.
PELACHOVÁ, Tatiana - LAPIN, Juraj. Microstructure and phase stability of a cast TiAl-based alloy during annealing. In Acta Metallurgica Slovaca. - Košice : Technická univerzita - Hutnícka fakulta : Ústav materiálového výskumu SAV, 2004, roč. 10, č. 1, s. 530-534. ISSN 1338-1156.
ŠLÍŽEK, Oldřich - ORAVSKÝ, Vladimír. Analýza citlivosti vybraných parametrov na vlastnosti obdĺžnikovej dosky a valcovej škrupiny. In Strojnícky časopis. - Bratislava : Ústav materiálov a mechaniky strojov SAV, 1959-, 2004, roč. 55, č. 3, s.166-186. ISSN 0039-2472.
ŠTEFÁNIK, Pavol - ŠEBO, Pavol - KAVECKÝ, Štefan. Surface structure of carbon fibres - copper matrix composites after abrasive wear. In Acta Metallurgica Slovaca, 2004, roč. 10, č. 1, s. 600-604. ISSN 1338-1156.
ŠEBO, Pavol - ŠTEFÁNIK, Pavol. Thermophysical properties of copper - carbon fibre composite. In Komunikácie : vedecké listy žilinskej univerzity. - Žilina : EDIS, 2004, č.2, s.30-33.
WISZT, Erich - WISZTOVÁ, Elena. Paths in valuated graphs and their use in acoustics. In Studies of the University of Žilina : Mathematical series. - Žilina : University of Žilina, 2003, vol. 16, p.107-114. ISSN 1336-149X.
KAPIŠINSKÝ, Igor - CEVOLANI, Giordano - IŽDINSKÝ, Karol - PÁNEK, Zdeněk - ZEMÁNKOVÁ, Milina. Supplement to the analyses of the Fermo meteorite. In Contributions to geophysics and geodesy, 2004, vol. 34, no. 1, . p. 67-79. (2004 - SCOPUS). ISSN 1335-2806.
BALOG, Martin - NAGY, Juraj - SIMANČÍK, František - IŽDINSKÝ, Karol. Ultrafinetgrained PM aluminium profiles. In EPMA. Powder Metallurgy 2004 : world congress and exhibition. - Shrewsbury : EPMA, 2004.
SIMANČÍK, František - FLOREK, Roman - TOBOLKA, Peter. Reinforced aluminium foam profiles. In EPMA. Powder Metallurgy 2004 : world congress and exhibition. - Shrewsbury : EPMA, 2004.
BALLO, Igor - CHMÚRNY, Rudolf. Optimisation of the parameters at the passage of the rotor through critical speed by means of proper tuning. In ZOLOTAREV, Igor - POŽIVILOVÁ, Alena. Engineering Mechanics 2004 : national conference. - Svratka : Institute of Thermomechanics Academy of Sciences, 2004.
KUDLIČKA, Ján. Energy flow of torsion waves in a transversely isotropic cylinder. In ZOLOTAREV, Igor. Interaction and Feedbacks 2004 : XI-th national seminar with international participation. - Prague : Institute of Thermomechanics AS CR, 2004, s.65-70. ISBN 80-85918-91-9.
BUGÁR, I. - CAPEK, I. - IVAN, Jozef - CHITU, L. - MAJKOVÁ, Eva - CHORVÁT, D. Time-resolved absorption spectroscopy of metal nanoparticles in colloidal solution. In Femtochemistry and Femtobiology : VIth international conference on femtochemistry. - Amsterdam : Elsevier, 2004, s. 545-548.
MAZÚCH, Tibor. O rekonštrukcii kmitavých sústav so spätnoväzobným tlmením z nameraných vlastných párov. In ZOLOTAREV, Igor. Interaction and Feedbacks 2004 : XI-th national seminar with international participation. - Prague : Institute of Thermomechanics AS CR, 2004, s.87-94. ISBN 80-85918-91-9.
CSUBA, Adrian - MIKULA, Marian. Príprava priečnych rezov pre štúdium štruktúry tenkých vrstiev pomocou TEM. In Digital Graphic. Vrstvy a povlaky 2004 : zborník prednášok. - Trenčín : Digital Graphic, 2004, s.91-94. ISBN 80-968337-8-2.
ORAVSKÝ, Vladimír. Some results of steady run instability of basic machine aggregates. In TU. IX.international conference on the Theory of Machines and Mechanisms. - Liberec : TU, 2004. ISBN 80-7083-847-7.
SIMANČÍK, František - FLOREK, Roman. Lightweight load-bearing components based on reinforced aluminium foams. In Neue Materialien. Cellular Metals and Polymers : symposium. - Fürth : Neue Materialien, 2004.
JERZ, Jaroslav - SIMANČÍK, František. Ballistic reformance of reinforced aluminium foam. In GRILEC, Krešimir. MATRIB ´04 : 9. conference on materials, processes, friction and wear. - Vela Luka : Croatian Society for Materials and Tribology, 2004.
JERZ, Jaroslav - SIMANČÍK, František. Lightweight armour design based on reinforced aluminium foam. In ISL. 2nd Light-Weight Armour Group Workshop : proceedings. - Saint-Louis : ISL, 2004.
STEIN, George Juraj - MÚČKA, Peter - CLEMENT, Philippe. Vibration mitigation by intelligent control of seat suspension damper. In PREUMONT, André - VALÁŠEK, Michael. EUROMECH Colloquium 455. - Prague : Czech Technical University, 2004.
KÚDELA, Stanislav - OSWALD, Steffen - BAUNACK, S - KÚDELA, Stanislav, Jr. - WETZIG, Klaus. The ion-exchange promoted interfacial strength in MMCs. In The Department of Metal Physics. 9th International symposium on physics of materials. - Prague : The Department of Metal Physics, Charles University Prague, 2004.
WISZT, Erich - WISZTOVÁ, Elena. The influence of fast excitation on vibration of a vertically handing flexible rope. In ZOLOTAREV, Igor. Interaction and Feedbacks 2004 : XI-th national seminar with international participation. - Prague : Institute of Thermomechanics AS CR, 2004, s.221-226. ISBN 80-85918-91-9.
STEIN, George Juraj - ZÁHORANSKÝ, Radúz - MÚČKA, Peter - CHMÚRNY, Rudolf - MEYER, Henning. On dry-friction modelling in simple, kinematically excited, vibration isolation systems. In UT AV CR. Dynamics of machines 2004 : Czech committee of the european mechanics society colloquium, s.117-124. ISBN 80-85918-85-4.
STEIN, George Juraj - ZAHORANSKÝ, Radúz - MÚČKA, Peter - CHMÚRNY, Rudolf - MEYER, H. On dry-friction modelling in simple, kinematically excited, vibration isolation systems. In SAS, P. - DE MUNCK, M. ISMA. - Leuven : Katholieke Universiteit, 2004. ISBN 90-73802-82-2.
KOVÁČIK, Jaroslav - JERZ, Jaroslav - MÜLLEROVÁ, Katarína - SIMANČÍK, František. Zinc foams. In BRZIAK, Peter - JAJCAY, Alojz. Advanced metallic materials and their joining : proceedings of the papers and posters abstracts of the international conference. - Bratislava : Výskumný ústav zváračský, 2004.
BALOG, Martin - IŽDINSKÝ, Karol - NAGY, Juraj - SIMANČÍK, František. Príprava a štúdium vlastností profilov pretlačených z ultrajemných hliníkových práškov. In SAV. Nanoved 2004 : celoslovenská konferencia o nanovedách, nanotechnológiách a nanomateriáloch. - Košice : SAV, 2004.
SIMANČÍK, František. Konštrukčné kovové profily s nanoštruktúrou. In SAV. Nanoved 2004 : celoslovenská konferencia o nanovedách, nanotechnológiách a nanomateriáloch. - Košice : SAV, 2004.
KORÁB, Juraj - ŠTEFKE, Ľubomír. Preparation of Mg-carbon/graphite composites by the gas pressure infiltration method. In BRZIAK, Peter - JAJCAY, Alojz. Advanced metallic materials and their joining : proceedings of the papers and posters abstracts of the international conference. - Bratislava : Výskumný ústav zváračský, 2004.
NAGY, Juraj - BALOG, Martin - IŽDINSKÝ, Karol - SIMANČÍK, František - ŠVEC, Pavol. Možnosti prípravy "bulk" materiálov z rýchlostuhnutých hliníkových pások. In SAV. Nanoved 2004 : celoslovenská konferencia o nanovedách, nanotechnológiách a nanomateriáloch. - Košice : SAV, 2004.
IŽDINSKÝ, Karol - NAGY, Juraj - BALOG, Martin - SIMANČÍK, František - ŠVEC, Pavol - JANIČKOVIČ, Dušan. Štúdium mikroštruktúrnych zmien pri devitrifikácii amorfnej pásky AlFe7Nb3. In SAV. Nanoved 2004 : celoslovenská konferencia o nanovedách, nanotechnológiách a nanomateriáloch. - Košice : SAV, 2004.
HRUBÁ, Ľ. - MIKULA, M. - GRANČIČ, B. - VALČUHA, Štefan - KÚŠ, P. Vlastnosti tenkých tvrdých povlakov pre technologické aplikácie. In katedra výrobných systémov Sjf STU. Náradie 2004 : medzinárodná konferencia. - Bratislava : katedra výrobných systémov Sjf STU, 2004, s.115-118. ISBN 80-227-2043-7.
IŽDINSKÝ, Karol - IŽDINSKÁ, Zita - IVAN, Jozef - ZEMÁNKOVÁ, Milina - CSUBA, Adrian - MINÁR, Pavol. Štúdium mikroštruktúry NiAl plazmovo striekaného povlaku po tepelnom spracovaní. In Mechanical Engineering 2004. - Bratislava : Slovak University of Technology in Bratislava, 2004.
BALLÓKOVÁ, Beáta - IVAN, Jozef - BESTERCI, Michal - BÖHM, Alexander - WEISSGÄRBER, Thomas. Microstructure and mechanical properties of ZrO2-reinforced MoSi2 matrix composites = Mikrtoštruktúra a mechanické vlastnosti kompozitov na báze MoSi2 spevnených ZrO2. In Acta Metallurgica Slovaca, 2004, roč. 10, špec.č., s. 909-912. ISSN 1338-1156. (Metallography 2004 : 12th international symposium on metallography).
ONDRÚŠ, Ľuboš. Microstructure and mechanical properties of Al2O3 particle reiforced TiAl-based matrix composites. In FEMS. Junior Euromat 2004. - Lausanne : FEMS, 2004.
KOVÁČIK, Jaroslav - JERZ, Jaroslav - MÜLLEROVÁ, Katarína - SIMANČÍK, František. Foaming of zinc. In Université de Marne-la-Vallée. 5th European Conference on Foams, Emulsions and Applications. - Champs-Sur-Marne : Université de Marne-la-Vallée, 2004.
LAPIN, Juraj - NAZMY, Mohamed - STAUBLI, Marc. Effect of Long-Term Aging and Creep Exposure on the Microstructure of TiAl-Based Alloy for Industrial Applications. In MRS. Fall Meeting 2004. - Warrendale : MRS, 2004.
SIMANČÍK, František. Aluminium foams: dreams, reality and future. In BANHART, J. - FLECK, N.A. Cellular metals and metal foaming technology MetFoam 2003 : 3rd international conference. - Berlin : MIT-Verlag, 2003, s. 1.
MÜLLEROVÁ, Katarína - SIMANČÍK, František - NOSKO, Martin. Effect of chemical composition on the foaming of Al alloys. In FEMS. Junior Euromat 2004. - Lausanne : FEMS, 2004.
NOSKO, Martin - SIMANČÍK, František - MÜLLEROVÁ, Katarína. Anisotropy of Aluminium Foam. In FEMS. Junior Euromat 2004. - Lausanne : FEMS, 2004.
MÜLLEROVÁ, Katarína - SIMANČÍK, František - ŠVEC, P. Al-based systems with unusual mechanical and transport properties. In WOJCIECHOWSKI, Krzystof W. Auxetics and related systems. - Poznań : Institute of Molecular Physics Polish Academy of Sciences, 2004. ISBN 83-904784-0-4.
BESTERCI, Michal - IVAN, Jozef - VELGOSOVÁ, Oksana - HVIZDOŠ, Pavol - SÜLLEIOVÁ, Katarína. Influence of Al4C3 particles on fracture mechanism in Al-Al4C3 material. In ICEFA-I. 1st international conference on engineering failure analysis. Lisbon, Portugal, 12.-14.7.2004 : Programme and abstracts. - Oxford : Elsevier, 2004, p. P1.16.
SIMANČÍK, František - ŠVEC, Peter. Fine-structured materials and their industrial applications. In BRZIAK, Peter - JAJCAY, Alojz. Advanced metallic materials and their joining : proceedings of the papers and posters abstracts of the international conference. - Bratislava : Výskumný ústav zváračský, 2004.
GRANČIČ, B. - MIKULA, Marián - GREGOR, M. - ŠTEFEČKA, M. - DOBROČKA, Edmund - HRUBÁ, Ľ. - JACKO, V. - ZAHORAN, M. - PLECENIK, A. - KÚŠ, P. The influence of deposition parameters on TiB2 thin films prepared by DC magnetron sputtering. In MOZETIČ, M. - ŠETINA, J. - KOVAČ, J. 10th Joint vacuum conference : 11th Meeting of Slovenian and Croatian Vacuum Scientists. - Ljubljana : Infokart, 2004. ISBN 961-90025-5-5.
MARKUŠ, Štefan. Maďari pod lupou. Doslov Dušan Kováč. 1. vyd. Bratislava : Veda, 2003. 252 s. ISBN 80-224-0785-2.
STEIN, George Juraj - MÚČKA, Peter - GUNSTON, T.P. - CLEMENT, M.E. Identification ond optimisation of a vertical seat suspension system for a railway vehicle. In Budapest University of Technology and Economics. Vehicle System Dynamics, Identification and Anomalies. - Budapest : Budapest University of Technology and Economics, 2004, s.10.